2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com Tue, 10 Sep 2024 08:36:26 +0000 en-US hourly 1 //wordpress.org/?v=5.9 //wlyjfw.com/wp-content/uploads/2017/04/cropped-topbg-Copy-100x100.png 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com 32 32 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-r6-mini-r6-mini-e/ Thu, 21 Sep 2023 02:35:56 +0000 //wlyjfw.com/?p=14703 The post ARCHER PLUS R6 Mini | R6 Mini-E appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT - BrushESC (ETHOS)
LUA SCRIPT - BrushESC (OPTX)
MANUAL

Details File Size Download
UpdateTime: 2023-09-27
Version:  ENG		 2.4MB DOWNLOAD
UpdateTime: 2023-09-27
Version: CHN		 2.5MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2023-12-28 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function;
3. Fixed the issue of outputting useless data by SBUS once powering on the receiver.
  253KB DOWNLOAD
2023-09-21 v1.0.9
1.The first firmware for newly released products.
  253KB DOWNLOAD

LUA SCRIPT - BrushESC (ETHOS)

UpdateTime Version Notes File Size Download
2023-11-21 v1.00 1. The first Lua tool for newly released product. 5KB DOWNLOAD

LUA SCRIPT - BrushESC (OPTX)

UpdateTime Version Notes File Size Download
2023-12-15 v1.00 1. The first Lua tool for newly released product. 5KB DOWNLOAD

The post ARCHER PLUS R6 Mini | R6 Mini-E appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-sr6-mini-sr6-mini-e/ Thu, 21 Sep 2023 02:35:14 +0000 //wlyjfw.com/?p=14702 The post ARCHER PLUS SR6 Mini | SR6 Mini-E appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT - Stab (ETHOS)
LUA SCRIPT - BrushESC (ETHOS)
LUA SCRIPT - BrushESC (OPTX)
LUA SCRIPT - Stab (OPTX)
MANUAL

Details File Size Download
UpdateTime: 2023-09-27
Version:  ENG		 2.4MB DOWNLOAD
UpdateTime: 2023-09-27
Version: CHN		 2.5MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2024-07-31 v1.0.11

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  314KB DOWNLOAD
2023-12-28 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function;
3. Fixed the issue of outputting useless data by SBUS once powering on the receiver.
  253KB DOWNLOAD
2023-09-21 v1.0.9
1.The first firmware for newly released products.
  253KB DOWNLOAD

LUA SCRIPT - Stab (ETHOS)

UpdateTime Version Notes File Size Download
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– AP Series (â‰?.0.11)		 60KB DOWNLOAD
2023-11-20 v2.0.6 1. Added the Roll/Pitch angle control feature for Stabilization mode. 61KB DOWNLOAD
2023-10-11 v2.0.5 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 61KB DOWNLOAD

LUA SCRIPT - BrushESC (ETHOS)

UpdateTime Version Notes File Size Download
2023-11-21 v1.00 1. The first Lua tool for newly released product. 5KB DOWNLOAD

LUA SCRIPT - BrushESC (OPTX)

UpdateTime Version Notes File Size Download
2023-12-15 v1.00 1. The first Lua tool for newly released product. 5KB DOWNLOAD

LUA SCRIPT - Stab (OPTX)

UpdateTime Version Notes File Size Download
2023-11-02 v2.04 Please make sure the firmware on your stabilization receivers is up to date. 66kb DOWNLOAD

The post ARCHER PLUS SR6 Mini | SR6 Mini-E appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-r12/ Wed, 09 Aug 2023 09:02:49 +0000 //wlyjfw.com/?p=14594 The post ARCHER PLUS R12+ appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime: 2023-08-09
Version: ENG		 2.58MB DOWNLOAD
UpdateTime: 2023-08-09
Version: CHN		 3.00MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm)
UpdateTime Version Notes File Size Download
2023-12-28 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function.
  249KB DOWNLOAD

The post ARCHER PLUS R12+ appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-sr12/ Tue, 08 Aug 2023 08:46:41 +0000 //wlyjfw.com/?p=14593 The post ARCHER PLUS SR12+ appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT (ETHOS)
LUA SCRIPT (OPTX)
MANUAL

Details File Size Download
UpdateTime: 2023-08-09
Version: ENG		 2.58MB DOWNLOAD
UpdateTime: 2023-08-09
Version: CHN		 3.00MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm)
UpdateTime Version Notes File Size Download
2024-07-31 v1.0.11

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  310KB DOWNLOAD
2023-12-28 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function.
  249KB DOWNLOAD

LUA SCRIPT (ETHOS)

UpdateTime Version Notes File Size Download
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– AP Series (â‰?.0.11)		 60KB DOWNLOAD
2023-07-27 v2.0.5 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.0.4 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

LUA SCRIPT (OPTX)

UpdateTime Version Notes File Size Download
2023-11-02 v2.04 Please make sure the firmware on your stabilization receivers is up to date. 103kb DOWNLOAD

The post ARCHER PLUS SR12+ appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-sr8/ Thu, 11 May 2023 05:34:23 +0000 //wlyjfw.com/?p=14432 The post ARCHER PLUS SR8 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT (ETHOS)
LUA SCRIPT (OPTX)
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 2.01MB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 2.1MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2024-07-31 v1.0.11

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  314KB DOWNLOAD
2023-12-27 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function;
3. Fixed the issue of outputting useless data by SBUS once powering on the receiver.
  251KB DOWNLOAD
2023-09-14 v1.0.8
1. Reduced the effect brought by vibrations for the stabilization function. (AP SR8)
  241KB DOWNLOAD
2023-06-28 v1.0.5
1. The first release.
  240KB DOWNLOAD

LUA SCRIPT (ETHOS)

UpdateTime Version Notes File Size Download
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– AP Series (â‰?.0.11)		 60KB DOWNLOAD
2023-07-27 v2.0.5 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.0.4 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

LUA SCRIPT (OPTX)

UpdateTime Version Notes File Size Download
2023-11-02 v2.04 Please make sure the firmware on your stabilization receivers is up to date. 103kb DOWNLOAD

The post ARCHER PLUS SR8 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-rs/ Thu, 11 May 2023 00:58:39 +0000 //wlyjfw.com/?p=14489 The post ARCHER PLUS RS appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
F.Port Firmware (ACCST Mode)
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 635KB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 839KB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2023-11-03 v1.0.9
1. Fixed the issue of losing the telemetry after connecting the flight controller for running a short period.
  249kb DOWNLOAD
2023-06-28 v1.0.6
1.Fixed the issue that the receiver does not work after recycling the power to register/bind.
2.Added the firmware support to have the RS work in ACCST F.Port mode.
  474KB DOWNLOAD
2023-05-12 v1.0.5
1.Fixed the issue of the receiver settings for the first time cannot be saved in the ‘option’.
  237KB DOWNLOAD

F.Port Firmware (ACCST Mode)

UpdateTime Version Notes File Size Download
2023-11-03 v1.0.9
1. Fixed the issue of losing the telemetry after connecting the flight controller for running a short period.
  247kb DOWNLOAD
2023-05-12 v1.0.5
This firmware has the F.Port supported in ACCST mode.
(Note: With ACCST F.Port firmware, ACCESS mode is still operational with Smart Match. Only in ACCST mode F.Port is used instead of S.Port.)
  237KB DOWNLOAD

The post ARCHER PLUS RS appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-r8/ Fri, 05 May 2023 07:19:26 +0000 //wlyjfw.com/?p=14411 The post ARCHER PLUS R8 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 1.17MB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 1.16MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2023-12-27 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function;
3. Fixed the issue of outputting useless data by SBUS once powering on the receiver.
  251KB DOWNLOAD
2023-09-14 v1.0.8
1. Reduced the effect brought by vibrations for the stabilization function. (AP SR8)
  241KB DOWNLOAD
2023-06-28 v1.0.5
1. The first release.
  240KB DOWNLOAD

The post ARCHER PLUS R8 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-gr8/ Fri, 05 May 2023 07:19:23 +0000 //wlyjfw.com/?p=14412 The post ARCHER PLUS GR8 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 1.17MB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 1.16MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2023-12-27 v1.0.10
1. Fxied the Stabilization Lua scripts’ compatibility issue running on part of OpenTX radio models;
2. Canceled the operation step of putting the throttle channel to the lowest position while doing the Self-Check function;
3. Fixed the issue of outputting useless data by SBUS once powering on the receiver.
  251KB DOWNLOAD
2023-09-14 v1.0.8
1. Reduced the effect brought by vibrations for the stabilization function. (AP SR8)
  241KB DOWNLOAD
2023-06-28 v1.0.5
1. The first release.
  240KB DOWNLOAD

The post ARCHER PLUS GR8 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-rs-mini/ Fri, 28 Apr 2023 09:14:56 +0000 //wlyjfw.com/?p=14468 The post ARCHER PLUS RS Mini appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
F.Port Firmware (ACCST Mode)
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 635KB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 839KB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2023-11-03 v1.0.9
1. Fixed the issue of losing the telemetry after connecting the flight controller for running a short period.
  247kb DOWNLOAD
2023-05-12 v1.0.5
1.Fixed the issue of telemetry cannot be received after repowering the receiver.
  237KB DOWNLOAD

F.Port Firmware (ACCST Mode)

UpdateTime Version Notes File Size Download
2023-11-03 v1.0.9
1. Fixed the issue of losing the telemetry after connecting the flight controller for running a short period.
  247kb DOWNLOAD
2023-05-12 v1.0.5
This firmware has the F.Port supported in ACCST mode.
(Note: With ACCST F.Port firmware, ACCESS mode is still operational with Smart Match. Only in ACCST mode F.Port is used instead of S.Port.)
  237KB DOWNLOAD

The post ARCHER PLUS RS Mini appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-gr6/ Mon, 24 Apr 2023 06:44:11 +0000 //wlyjfw.com/?p=14436 The post ARCHER PLUS GR6 | GR6FB appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE (GR6 | GR6FB)
MANUAL

Details File Size Download
UpdateTime: 2023-04-24
Version: ARCHER PLUS GR6 ENG		 958KB DOWNLOAD
UpdateTime: 2023-07-24
Version: ARCHER PLUS GR6FB ENG		 909KB DOWNLOAD
UpdateTime: 2023-04-24
Version: ARCHER PLUS GR6 CHN		 958KB DOWNLOAD
UpdateTime: 2023-07-24
Version: ARCHER PLUS GR6FB CHN		 909KB DOWNLOAD

FIRMWARE (GR6 | GR6FB)

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2024-01-09 v1.0.10
1. Fixed the issue of outputting the ineffective signal by SBUS Out once powering the receiver on.
  251KB DOWNLOAD
2023-07-13 v1.0.5
1.The first firmware for newly released products.
  239KB DOWNLOAD

The post ARCHER PLUS GR6 | GR6FB appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-r6/ Mon, 24 Apr 2023 06:44:07 +0000 //wlyjfw.com/?p=14437 The post ARCHER PLUS R6 | R6FB appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE (R6 | R6FB)
MANUAL

 

Details File Size Download
UpdateTime  :  2023-04-24
Version  : ARCHER PLUS R6 ENG		 958KB DOWNLOAD
UpdateTime  :  2023-07-24
Version  :  ARCHER PLUS R6FB ENG		 909KB DOWNLOAD
UpdateTime  :  2023-04-24
Version  : ARCHER PLUS R6 CHN		 958KB DOWNLOAD
UpdateTime  :  2023-07-24
Version  :  ARCHER PLUS R6FB CHN		 909KB DOWNLOAD

FIRMWARE (R6 | R6FB)

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2024-01-09 v1.0.10
1. Fixed the issue of outputting the ineffective signal by SBUS Out once powering the receiver on.
  251KB DOWNLOAD
2023-07-13 v1.0.5
1.The first firmware for newly released products.
  239KB DOWNLOAD

The post ARCHER PLUS R6 | R6FB appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-sr10/ Tue, 29 Nov 2022 05:41:29 +0000 //wlyjfw.com/?p=14275 The post ARCHER PLUS SR10+ appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT (ETHOS)
LUA SCRIPT (OPTX)
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 688KB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 2.33MB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2024-07-31 v1.0.11

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  308KB DOWNLOAD
2024-01-09 v1.0.10
1. Fixed the compatible issue of the receiver working with the Stab Lua scripts while running on some OPTX radio models (Taranis X9D Plus, etc.)
  245KB DOWNLOAD
2023-10-19 v1.0.9
1. Added Pitch and Roll angle control for stabilization mode.
2. Fixed the telemetry error of the Pitch and Roll angle in the calibration process after repowering.
3. Fixed the issue that the Pitch angle sometimes fails in Hover mode.
4. Reduced the effect brought by vibrations for the stabilization function.
5. Fixed the issue of outputting a jitter signal while connecting or hot-swapping a redundant receiver by SBUS port.
  245KB DOWNLOAD
2023-05-22 v1.0.5
1. Added the second group of stabilized 5 channels in ACCESS mode.
2. Channel setting updates for stablization modes :
Gain channel is changed from CH9 � class= CH13;
Stablization Modes: CH10&CH11âž? class=CH14&CH15;
Emergency Mode: CH12âž? class=CH16.
Note1: The calibration and configuration for the SR10+ receiver in ACCESS mode with 1.0.5 or later firmware requires the v2.04 or newer lua tools which can be downloaded from the download page.
Note2: To set up the Stabilization Mode on the Archer Plus SR10+ receiver using the OPTX transmitter, please roll back to 1.0.2 firmware version and download the OPTX script tool from the provided link below: //wlyjfw.com/wp-content/uploads/Downloads/TOOL/R9S-SxR(lua)/利来·国际_STAB_RX_2.03.zip
  236KB DOWNLOAD
2023-03-08 v1.0.2
1. Added the support of S.Port function via Upgrade Port in ACCST mode.
2. Added support for working with RB25 and RB35 series devices.
  207KB DOWNLOAD

LUA SCRIPT (ETHOS)

UpdateTime Version Notes File Size Download
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– AP Series (â‰?.0.11)		 63KB DOWNLOAD
2023-11-24 v2.06 1. Added the Roll/Pitch angle control feature for Stabilization mode. 59KB DOWNLOAD
2023-07-27 v2.05 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.04 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

LUA SCRIPT (OPTX)

UpdateTime Version Notes File Size Download
2023-11-02 v2.04 Please make sure the firmware on your stabilization receivers is up to date. 103kb DOWNLOAD

The post ARCHER PLUS SR10+ appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-plus-r10/ Tue, 29 Nov 2022 05:41:24 +0000 //wlyjfw.com/?p=14281 The post ARCHER PLUS R10+ appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime: 2023-07-21
Version: ENG		 688KB DOWNLOAD
UpdateTime: 2023-07-21
Version: CHN		 967KB DOWNLOAD

FIRMWARE

* The suggested RSSI alert settings for both ACCESS and ACCST modes of Archer Plus series receivers are 32 (Critical Alarm) and 35 (Low Alarm).
UpdateTime Version Notes File Size Download
2024-01-09 v1.0.10
1. Fixed the compatible issue of the receiver working with the Stab Lua scripts while running on some OPTX radio models (Taranis X9D Plus, etc.)
  245KB DOWNLOAD
2023-10-19 v1.0.9
1. Fixed the issue of outputting a jitter signal while connecting or hot-swapping a redundant receiver by SBUS port.
  245KB DOWNLOAD
2023-05-22 v1.0.5
1. Added the second group of stabilized 5 channels in ACCESS mode.
  236KB DOWNLOAD
2023-03-08 v1.0.2
1. Added the support of S.Port function via Upgrade Port in ACCST mode.
2. Added support for working with RB25 and RB35 series devices.
  207KB DOWNLOAD

The post ARCHER PLUS R10+ appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-sr10-pro/ Wed, 09 Sep 2020 03:25:56 +0000 //wlyjfw.com/?p=13132 The post ARCHER SR10 PRO appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-28
Version  :  20220228		 4.92MB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7 Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2021-01-27 v2.02 Added option to support setting whether or not gyro is enabled after failsafe.
Lua files for radios running openTx.		 136KB DOWNLOAD
2020-11-10 v2.01   Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post ARCHER SR10 PRO appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-sr8-pro/ Wed, 09 Sep 2020 03:23:30 +0000 //wlyjfw.com/?p=13130 The post ARCHER SR8 PRO appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-28
Version  :  20220228		 4.81MB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7 Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2021-01-27 v2.02 Added option to support setting whether or not gyro is enabled after failsafe.
Lua files for radios running openTx.		 136KB DOWNLOAD
2020-11-10 v2.01   Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post ARCHER SR8 PRO appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-sr6/ Wed, 09 Sep 2020 03:18:07 +0000 //wlyjfw.com/?p=13128 The post ARCHER SR6 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-25
Version  :  20220225		 4.78MB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2021-01-27 v2.02 Added option to support setting whether or not gyro is enabled after failsafe.
Lua files for radios running openTx.		 136KB DOWNLOAD
2020-11-10 v2.01   Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post ARCHER SR6 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-rs/ Fri, 28 Aug 2020 07:33:27 +0000 //wlyjfw.com/?p=13110 The post ARCHER RS appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-08-28
Version  :  20200828		 460kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2022-09-19 v2.1.10
Fixed the compatibility issue to work with MSH helicopter flight control units in FBUS mode.
 129KB DOWNLOAD
2022-08-12 v2.1.9 Add the support of FBUS. 129KB DOWNLOAD
2021-03-24 v2.1.8 Resolved slow telemetry refresh problem under redundant mode. 127KB DOWNLOAD
2021-02-09 v2.1.7 1. Fixed occasional signal delay when working with Betaflight flight control in race mode.
2. Increase the speed of OTA upgrades.		 129KB DOWNLOAD
2021-01-27 v2.1.6 Added support for 4ms Racing Mode
Noteï¼?br /> 1. In RacingMode, the register/binding are not supported and there is no telemetry feedback.
2. Racing mode is not supported to be turned On/Off during use when used in conjunction with flight control.
After the mode switch, the receiver should be repowered otherwise the flight control output will jitter due to different signal cycles.
3. Module & radio firmwares need to be upgraded at the same time.		 129KB DOWNLOAD
2021-01-06 v2.1.2 First release. 161KB DOWNLOAD

The post ARCHER RS appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-r4/ Fri, 28 Aug 2020 07:22:55 +0000 //wlyjfw.com/?p=13109 The post ARCHER R4 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-12-01
Version  :  20201201		 503kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-09-29 v2.1.11 1. Fixed the register and bind issues of the Archer R4 receiver. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7 1. Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD

The post ARCHER R4 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-r10-pro/ Wed, 17 Jun 2020 06:18:56 +0000 //wlyjfw.com/?p=12824 The post ARCHER R10 PRO appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-08-28
Version  :  20200828		 578kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD

The post ARCHER R10 PRO appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-r8-pro/ Tue, 16 Jun 2020 03:43:48 +0000 //wlyjfw.com/?p=12802 The post ARCHER R8 PRO appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-08-28
Version  :  20200828		 459kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD

The post ARCHER R8 PRO appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-r6/ Mon, 15 Jun 2020 06:15:56 +0000 //wlyjfw.com/?p=12823 The post ARCHER R6 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-08-28
Version  :  V1.1		 542kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD

The post ARCHER R6 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-m/ Wed, 29 Apr 2020 07:12:32 +0000 //wlyjfw.com/?p=12701 The post ARCHER M+ appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-08-28
Version  :  20200828		 403kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 1. Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD
2020-06-23 v2.1.0 First release. 201KB DOWNLOAD

The post ARCHER M+ appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-gr6/ Tue, 28 Apr 2020 06:13:09 +0000 //wlyjfw.com/?p=12822 The post ARCHER GR6 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-08-28
Version  :  20200828		 551kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD

The post ARCHER GR6 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-gr8/ Mon, 25 Nov 2019 01:34:46 +0000 //wlyjfw.com/?p=12355 The post ARCHER GR8 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
FIRMWARE
MANUAL

Details File Size Download
UpdateTime  :  2020-12-01
Version  :  20201201		 531kB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

CERTIFICATE

Certificate Type UpdateTime Version File Size Download
FCC CERTIFICATE 2019-11-25 191125 279KB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD
2020-09-30 v2.1.2 1. Support F.PORT2.0.
2. Fix the problem of random output in some channels after power on.
3. Fix the problem that the RSSI output does not update in F.ORT mode.		 215KB DOWNLOAD
2020-06-23 v2.1.0 First release. 201KB DOWNLOAD

The post ARCHER GR8 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/rx4r/ Fri, 15 Jun 2018 07:43:34 +0000 //wlyjfw.com/?p=10063 The post RX4R appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
ACCESS FIRMWARE
ACCST D16 FIRMWARE
MANUAL

Details File Size Download
Communication Protocol : ACCST
UpdateTime  :  2019-06-27
Version  :  190627		 5.27MB DOWNLOAD
Communication Protocol : ACCESS
UpdateTime  :  2020-04-23
Version  :  20200423		 610KB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

CERTIFICATE

Certificate Type UpdateTime Version File Size Download
FCC CERTIFICATE 2019-02-25 190225 211KB DOWNLOAD
CE CERTIFICATE 2019-02-25 190225 224KB DOWNLOAD

ACCESS FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.8 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 147KB DOWNLOAD
2021-04-19 v2.1.7 1. Resolved the issue of that RXSR not starting properly when working with RXSR(RXSR as slave receiver) in redundancy mode .
2. Improved RF performance when working with the TANDEM module .		 147KB DOWNLOAD
2020-04-21 v2.1.0 1.Improved reliability and stability of signal connection
2.Increased the range of control
3.Improved the stability of telemetry feedback
4.Added FLR ( Frame Lost Rate) output.
5.Added configurable function for telemetry power.
6.Added the option for switching S.Port / F.Port protocol
Please update the firmware of all your radios(latest openTx or FrOS), RF modules and receivers accordingly.		 147KB DOWNLOAD
2019-08-12 v1.1.3 1. Further reduce the system latency.
2. Decrease PWM signal period to 7ms.
Note:Please update firmware of ISRM and radio to the latest versions accordingly.
Please take care of that your servos are compatible to 7ms PWM signal.		 1010KB DOWNLOAD
2019-04-26 v1.1.1 First release. 142KB DOWNLOAD

ACCST D16 FIRMWARE

UpdateTime Version Notes File Size Download
2023-07-21 ACCST D16 v2.1.9 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as specific error data or exceeding the limitation of devices connected in the S.Port link (ï¼?7 units).
Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
————————————————————————————�br /> Compatibility | ISRM Modules & ACCESS Radios
————————————————————————�———�br /> ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)		 286kB DOWNLOAD
2020-05-27 ACCST D16 v2.1.1 1. Fix the abnormal failsafe issue. 262kB DOWNLOAD
2020-03-24 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 262kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 266kB DOWNLOAD
2018-06-21 180516   First release.  264KB DOWNLOAD

The post RX4R appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/rx6r/ Thu, 14 Jun 2018 08:39:41 +0000 //wlyjfw.com/?p=10067 The post RX6R appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
ACCESS FIRMWARE
ACCST D16 FIRMWARE
MANUAL

Details File Size Download
Communication Protocol : ACCST
UpdateTime  :  2020-05-08
Version  :  20200508		 4.06MB DOWNLOAD
Communication Protocol : ACCESS
UpdateTime  :  2020-05-08
Version  :  20200508		 612KB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

CERTIFICATE

Certificate Type UpdateTime Version File Size Download
FCC CERTIFICATE 2019-02-25 190225 211KB DOWNLOAD
CE CERTIFICATE 2019-02-25 190225 224KB DOWNLOAD

ACCESS FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.8 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 147KB DOWNLOAD
2021-04-19 v2.1.7  1. Resolved the issue of that RXSR not starting properly when working with RXSR(RXSR as slave receiver) in redundancy mode .
2. Improved RF performance when working with the TANDEM module .		 147KB DOWNLOAD
2020-04-21 v2.1.0 1.Improved reliability and stability of signal connection
2.Increased the range of control
3.Improved the stability of telemetry feedback
4.Added FLR ( Frame Lost Rate) output.
5.Added configurable function for telemetry power.
6.Added the option for switching S.Port / F.Port protocol
Please update the firmware of all your radios(latest openTx or FrOS), RF modules and receivers accordingly.		 147KB DOWNLOAD
2019-08-12 v1.1.3 1. Further reduce the system latency.
2. Decrease PWM signal period to 7ms.
Note:Please update firmware of ISRM and radio to the latest versions accordingly.
Please take care of that your servos are compatible to 7ms PWM signal.		 1010KB DOWNLOAD
2019-04-26 v1.1.1 First release. 142KB DOWNLOAD

ACCST D16 FIRMWARE

UpdateTime Version Notes File Size Download
2023-07-21 ACCST D16 v2.1.9 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as specific error data or exceeding the limitation of devices connected in the S.Port link (ï¼?7 units).
Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
————————————————————————————�br /> Compatibility | ISRM Modules & ACCESS Radios
————————————————————————�———�br /> ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)		 286kB DOWNLOAD
2020-05-27 ACCST D16 v2.1.1 1. Fix the abnormal failsafe issue. 262kB DOWNLOAD
2020-03-24 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 262kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 266kB DOWNLOAD
2018-06-21 180516   First release.  264KB DOWNLOAD

The post RX6R appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/g-rx6/ Sat, 12 Aug 2017 08:41:37 +0000 //wlyjfw.com/?p=10069 The post G-RX6 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
ACCESS FIRMWARE
ACCST D16 FIRMWARE
MANUAL

Details File Size Download
Communication Protocol : ACCST
UpdateTime  :  2019-06-28
Version  :  190628		 3.79MB DOWNLOAD
Communication Protocol : ACCESS
UpdateTime  :  2020-06-30
Version  :  20200630		 624KB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

CERTIFICATE

Certificate Type UpdateTime Version File Size Download
FCC CERTIFICATE 2019-02-25 190225 211KB DOWNLOAD
CE CERTIFICATE 2019-02-25 190225 224KB DOWNLOAD

ACCESS FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.8 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 159KB DOWNLOAD
2021-04-19 v2.1.7  1. Resolved the issue of that RXSR not starting properly when working with RXSR(RXSR as slave receiver) in redundancy mode .
2. Improved RF performance when working with the X20 TANDEM module .		 159KB DOWNLOAD
2020-04-21 v2.1.0 1.Improved reliability and stability of signal connection
2.Increased the range of control
3.Improved the stability of telemetry feedback
4.Added FLR ( Frame Lost Rate) output.
5.Added configurable function for telemetry power.
6.Added the option for switching S.Port / F.Port protocol
Please update the firmware of all your radios(latest openTx or FrOS), RF modules and receivers accordingly.		 161KB DOWNLOAD
2019-08-12 v1.1.3 1. Further reduce the system latency.
2. Decrease PWM signal period to 7ms.
Note:Please update firmware of ISRM and radio to the latest versions accordingly.
Please take care of that your servos are compatible to 7ms PWM signal.		 1010KB DOWNLOAD
2019-04-26 v1.1.1 First release. 156KB DOWNLOAD

ACCST D16 FIRMWARE

UpdateTime Version Notes File Size Download
2023-07-21 ACCST D16 v2.1.9 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as specific error data or exceeding the limitation of devices connected in the S.Port link (ï¼?7 units).
Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
————————————————————————————�br /> Compatibility | ISRM Modules & ACCESS Radios
————————————————————————�———�br /> ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)		 286kB DOWNLOAD
2020-07-14 ACCST D16 v2.1.2 1. Fix the FL unset problem in SBUS. 286kB DOWNLOAD
2020-05-27 ACCST D16 v2.1.1 1. Fix the abnormal failsafe issue.
2. Optimized the vario sensor output for G-RX8/G-RX6.		 286kB DOWNLOAD
2020-04-21 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 290kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 298kB DOWNLOAD
2018-10-25 181025 1.  Modify the altimeter filtering algorithm to improve the stability . 2. Fixed the BUG that S.PORT could not transmit 125 & 126. 296KB DOWNLOAD
2018-06-21  180516   First release.  288KB DOWNLOAD

The post G-RX6 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/g-rx8/ Sat, 12 Aug 2017 05:24:58 +0000 //wlyjfw.com/?p=7275 The post G-RX8 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
ACCESS FIRMWARE
ACCST D16 FIRMWARE
MANUAL

Details File Size Download
Communication Protocol : ACCST
UpdateTime  :  2020-05-09
Version  :  20200509		 1.39MB DOWNLOAD
Communication Protocol : ACCESS
UpdateTime  :  2020-04-23
Version  :  20200423		 710KB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

CERTIFICATE

UpdateTime Version Notes File Size Download
2017-06-12 170612 265KB DOWNLOAD

ACCESS FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Notes File Size Download
2023-07-21 v2.1.8 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 161KB DOWNLOAD
2021-04-19 v2.1.7  1. Resolved the issue of that RXSR not starting properly when working with RXSR(RXSR as slave receiver) in redundancy mode .
2. Improved RF performance when working with the TANDEM module .		 159KB DOWNLOAD
2020-04-21 v2.1.0 1.Improved reliability and stability of signal connection
2.Increased the range of control
3.Improved the stability of telemetry feedback
4.Added FLR ( Frame Lost Rate) output.
5.Added configurable function for telemetry power.
6.Added the option for switching S.Port / F.Port protocol
Please update the firmware of all your radios(latest openTx or FrOS), RF modules and receivers accordingly.		 161KB DOWNLOAD
2019-08-12 v1.1.3 1. Further reduce the system latency.
2. Decrease PWM signal period to 7ms.
Note:Please update firmware of ISRM and radio to the latest versions accordingly.
Please take care of that your servos are compatible to 7ms PWM signal.		 1010KB DOWNLOAD
2019-04-25 v1.1.1 First release. 156KB DOWNLOAD

ACCST D16 FIRMWARE

UpdateTime Version Notes File Size Download
2023-07-21 ACCST D16 v2.1.9 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as specific error data or exceeding the limitation of devices connected in the S.Port link (ï¼?7 units).
Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
————————————————————————————�br /> Compatibility | ISRM Modules & ACCESS Radios
————————————————————————�———�br /> ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)		 286kB DOWNLOAD
2020-07-14 ACCST D16 v2.1.2 1. Fix the FL unset problem in SBUS. 286kB DOWNLOAD
2020-05-27 ACCST D16 v2.1.1 1. Fix the abnormal failsafe issue.
2. Optimized the vario sensor output for G-RX8/G-RX6.		 286kB DOWNLOAD
2020-04-21 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 290kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 298kB DOWNLOAD
2019-11-27 191115  Fixed the problem of abnormal high frame loss rate. 293KB DOWNLOAD
2018-10-25 181025 1. Modify the altimeter filtering algorithm to improve the stability .
2. Fixed the BUG that S.PORT could not transmit 125 & 126.		 296KB DOWNLOAD

The post G-RX8 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz ACCESS – 利来·国际 – Lets you set the limits //wlyjfw.com/r-xsr/ Fri, 11 Aug 2017 17:33:21 +0000 //wlyjfw.com/?p=7407 The post R-XSR appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
ACCESS FIRMWARE
ACCST D16 FIRMWARE
MANUAL

Details File Size Download
Communication Protocol : ACCST
UpdateTime  :  2019-06-27
Version  :  190627		 978KB DOWNLOAD
Communication Protocol : ACCESS
UpdateTime  :  2020-05-08
Version  :  20200508		 559KB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

CERTIFICATE

UpdateTime Version File Size Download
2017-06-12 170612 265KB DOWNLOAD

ACCESS FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version      Notes File Size Download
2023-07-21 v2.1.8 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 147KB DOWNLOAD
2021-04-19 v2.1.7  1. Resolved the issue of that RXSR not starting properly when working with RXSR(RXSR as slave receiver) in redundancy mode .
2. Improved RF performance when working with the TANDEM module .		 143KB DOWNLOAD
2020-04-21 v2.1.0 1.Improved reliability and stability of signal connection
2.Increased the range of control
3.Improved the stability of telemetry feedback
4.Added FLR ( Frame Lost Rate) output.
5.Added configurable function for telemetry power.
6.Added the option for switching S.Port / F.Port protocol.
7.Hold button for about 5 seconds to get the RSSI output from CH16 SBUS .
Please update the firmware of all your radios(latest openTx or FrOS), RF modules and receivers accordingly.		 139KB DOWNLOAD
 2019-11-08 V1.1.4 1.Fix the issue that wrong RSSI values output.
2.F.Port firmware included.		   231KB DOWNLOAD
2019-08-12 v1.1.3 1. Further reduce the system latency.
2. Decrease PWM signal period to 7ms.
Note:Please update firmware of ISRM and radio to the latest versions accordingly.
Please take care of that your servos are compatible to 7ms PWM signal.		 1010KB DOWNLOAD
2019-05-09 V1.1.1 First release.
F.Port and S.Port are included.		   270KB DOWNLOAD

ACCST D16 FIRMWARE

UpdateTime Version Notes File Size Download
2021-01-06 ACCST D16 v2.1.1(F.Port firmware update only ) 1.Fix the issue that no output under failsafe mode(F.port firmware only). 495kB DOWNLOAD
2020-03-24 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 492kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

 

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 502kB DOWNLOAD
2019-11-29  v191112
v191128 (F.Port)		 1.Fixed the problem of abnormal high frame loss rate.
2. F.Port version included.		   500KB DOWNLOAD
2019-03-13 190311 1. Fix the bug that sometimes can not bind to radios.
2. F.Port version included.		   503KB DOWNLOAD

The post R-XSR appeared first on 利来·国际 - Lets you set the limits.

]]>