2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com Thu, 10 Apr 2025 06:48:44 +0000 en-US hourly 1 //wordpress.org/?v=5.9 //wlyjfw.com/wp-content/uploads/2017/04/cropped-topbg-Copy-100x100.png 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com 32 32 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com/td-r6-td-sr6/ Mon, 25 Dec 2023 06:59:00 +0000 //wlyjfw.com/?p=14858 The post TD R6 / TD SR6 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE (TD R6)
FIRMWARE (TD SR6)
LUA SCRIPT (TD SR6)
TOOLS (RBMixer)
MANUAL

Details File Size Download
UpdateTime: 2025-02-17
Version: ENG		 2.88MB DOWNLOAD
UpdateTime: 2025-02-17
Version: CHN		 2.95MB DOWNLOAD

FIRMWARE (TD R6)

UpdateTime Version Notes File Size Download
2024-12-20 v3.0.1

– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
  2.31MB DOWNLOAD
2024-06-05 v1.0.13
1. Fixed the issue that the receiver would output signal caused by the model ID (saved into the receiver) being unmatched to the selected Model once powering it.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  258KB DOWNLOAD
2024-01-12 v1.0.12
1. Added the support of the new hardware version.
2. Fixed the configuration issue of telemetry under 25mW mode.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  257KB DOWNLOAD
2023-11-17 v1.0.11
1. Fixed the issue of incorrect behavior of the Xact servo working in FBUS mode once powering on the receiver.
2. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  187KB DOWNLOAD
2023-03-09 v1.0.9
1. Added the 25mW option of the telemetry power. (The telemetry power of 2.4G and 900M bands is synchronized while the option is selected.)
  187KB DOWNLOAD
2022-09-29 v1.0.8
1. Add the support of using LUA of MSH flight controller units.
  187KB DOWNLOAD

FIRMWARE (TD SR6)

UpdateTime Version Note File Size Download
2024-12-20 v3.0.1

– Updated the Calibration and Setting method for Stab functions. (ETHOS v1.6.0 & New v3.0.1 Stab Lua tools are required to update!) (for Stab capable series)
– Changed the ACCZ setting in static from the original -1g to +1g. (for Stab capable series)
– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
=============================================================
For Stab-capable receivers
Step4. Please ensure the latest [V3.0.1] Stab Lua tools have been placed into your radio’s correct folder path (Scripts/StabilizerConfig). (Required by Stab-capable receivers.)
[Note] Please find the Stab Configuration tools in the Device Config Menu, under the Receiver sub-menu.
Step5. Factory Reset operation should be done after updating the Rx firmware, and then Rebound and Reconfiguration (especially the Stab functions including the 6-axis calibration) of all the functions are required. (due to adding the new feature of Fasilsafe data saving on the Rx end.).
 2.31MB DOWNLOAD
2024-07-31 v1.0.13

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  323KB DOWNLOAD
2023-12-25 v1.0.11
1.The first firmware for newly released products.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  259KB DOWNLOAD

LUA SCRIPT (TD SR6)

UpdateTime Version Notes
These are the PREVIOUS versions of the Stab Lua script. Please install the latest version through the Lua Library in ETHOS Suite.		 File Size Download
2024-12-20 v3.0.1 1. Updated the Calibration and Setting method for Stab functions. 80KB DOWNLOAD
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– TD Series (â‰?.0.13)		 63KB DOWNLOAD
2023-11-20 v2.06 1. Added the Roll/Pitch angle control feature for Stabilization mode. 62KB DOWNLOAD
2023-07-27 v2.05 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.04 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

TOOLS (RBMixer)

Tool UpdateTime Version Note File Size Download
RBMixer
(for TD SR6)		 2023-10-11 v1.0 1.The first release for ADV Stabilization feature. 9.06 MB DOWNLOAD

The post TD R6 / TD SR6 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com/td-r10-td-sr10/ Mon, 25 Dec 2023 00:48:16 +0000 //wlyjfw.com/?p=14853 The post TD R10 / TD SR10 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE (TD R10)
FIRMWARE (TD SR10)
LUA SCRIPT (TD SR10)
TOOLS (RBMixer)
MANUAL

Details File Size Download
UpdateTime: 2025-02-17
Version: ENG		 2.83MB DOWNLOAD
UpdateTime: 2025-02-17
Version: CHN		 2.81MB DOWNLOAD

FIRMWARE (TD R10)

UpdateTime Version Note File Size Download
2024-12-20 v3.0.1

– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
  2.31MB DOWNLOAD
2024-01-17 v1.0.12
1. Added the support of the new hardware version.
2. Fixed the issue of missing telemetry working above 25mW RF power in EU mode.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  263KB DOWNLOAD
2023-11-17 v1.0.11
1. Fixed the issue of incorrect behavior of the Xact servo working in FBUS mode once powering on the receiver.
2. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  253KB DOWNLOAD
2023-07-12 v1.0.9
1. Compatible with v0.2 hardware.
2. Improved signal performance under strong interference.
  187KB DOWNLOAD
2023-03-09 v1.0.8
1. Added the 25mW option of the telemetry power. (The telemetry power of 2.4G and 900M bands is synchronized while the option is selected.)
  187KB DOWNLOAD
2022-03-14 v1.0.7  First Release. 185kB DOWNLOAD

FIRMWARE (TD SR10)

UpdateTime Version Note File Size Download
2024-12-20 v3.0.1

– Updated the Calibration and Setting method for Stab functions. (ETHOS v1.6.0 & New v3.0.1 Stab Lua tools are required to update!) (for Stab capable series)
– Changed the ACCZ setting in static from the original -1g to +1g. (for Stab capable series)
– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
=============================================================
For Stab-capable receivers
Step4. Please ensure the latest [V3.0.1] Stab Lua tools have been placed into your radio’s correct folder path (Scripts/StabilizerConfig). (Required by Stab-capable receivers.)
[Note] Please find the Stab Configuration tools in the Device Config Menu, under the Receiver sub-menu.
Step5. Factory Reset operation should be done after updating the Rx firmware, and then Rebound and Reconfiguration (especially the Stab functions including the 6-axis calibration) of all the functions are required. (due to adding the new feature of Fasilsafe data saving on the Rx end.).
 2.31MB DOWNLOAD
2024-07-31 v1.0.13

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  331KB DOWNLOAD
2024-01-11 v1.0.11
1. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  267KB DOWNLOAD

LUA SCRIPT (TD SR10)

UpdateTime Version Notes
These are the PREVIOUS versions of the Stab Lua script. Please install the latest version through the Lua Library in ETHOS Suite.		 File Size Download
2024-12-20 v3.0.1 1. Updated the Calibration and Setting method for Stab functions. 80KB DOWNLOAD
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– TD Series (â‰?.0.13)		 63KB DOWNLOAD
2023-11-20 v2.06 1. Added the Roll/Pitch angle control feature for Stabilization mode. 62KB DOWNLOAD
2023-07-27 v2.05 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.04 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

TOOLS (RBMixer)

Tool UpdateTime Version Note File Size Download
RBMixer
(for TD SR10)		 2023-10-11 v1.0 1.The first release for ADV Stabilization feature. 9.06 MB DOWNLOAD

The post TD R10 / TD SR10 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com/td-r12-td-sr12/ Mon, 17 Jul 2023 07:45:12 +0000 //wlyjfw.com/?p=14563 The post TD R12 / TD SR12 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT (TD SR12)
TOOLS (RBMixer)
MANUAL

Details File Size Download
UpdateTime: 2025-02-18
Version: ENG		 3.01MB DOWNLOAD
UpdateTime: 2025-02-18
Version: CHN		 2.98MB DOWNLOAD

FIRMWARE

UpdateTime Version Notes File Size Download
2024-12-20 v3.0.1

– Updated the Calibration and Setting method for Stab functions. (ETHOS v1.6.0 & New v3.0.1 Stab Lua tools are required to update!) (for Stab capable series)
– Changed the ACCZ setting in static from the original -1g to +1g. (for Stab capable series)
– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
=============================================================
For Stab-capable receivers
Step4. Please ensure the latest [V3.0.1] Stab Lua tools have been placed into your radio’s correct folder path (Scripts/StabilizerConfig). (Required by Stab-capable receivers.)
[Note] Please find the Stab Configuration tools in the Device Config Menu, under the Receiver sub-menu.
Step5. Factory Reset operation should be done after updating the Rx firmware, and then Rebound and Reconfiguration (especially the Stab functions including the 6-axis calibration) of all the functions are required. (due to adding the new feature of Fasilsafe data saving on the Rx end.).
 2.31MB DOWNLOAD
2024-07-31 v1.0.13

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  332KB DOWNLOAD
2023-11-17 v1.0.11
1. Fixed the issue of incorrect behavior of the Xact servo working in FBUS mode once powering on the receiver.
2. Added the angle control feature for Stabilization mode.（TD SR12�br /> Note: Please set the Roll/Pitch Degree values to 0 by Lua script after updating the firmware.
3. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  268KB DOWNLOAD
2023-07-17 v1.0.6
1. Improved signal performance under strong interference.
2. Reduced the effect brought by vibrations for the stabilization function. (TD SR12)
3. Solved the abnormal signal output while working with R9 series receivers (via SBUS ports) by deleting the CH16 function (Emergency Mode) under quick mode. (TD SR12)
  257KB DOWNLOAD

LUA SCRIPT (TD SR12)

UpdateTime Version Notes
These are the PREVIOUS versions of the Stab Lua script. Please install the latest version through the Lua Library in ETHOS Suite.		 File Size Download
2024-12-20 v3.0.1 1. Updated the Calibration and Setting method for Stab functions. 80KB DOWNLOAD
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– TD Series (â‰?.0.13)		 63KB DOWNLOAD
2023-11-20 v2.06 1. Added the Roll/Pitch angle control feature for Stabilization mode. 62KB DOWNLOAD
2023-07-27 v2.05 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.04 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

TOOLS (RBMixer)

Tool UpdateTime Version Note File Size Download
RBMixer
(for TD SR12)		 2023-10-11 v1.0 1.The first release for ADV Stabilization feature. 9.06 MB DOWNLOAD

The post TD R12 / TD SR12 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com/td-sr18/ Mon, 10 Jul 2023 07:11:48 +0000 //wlyjfw.com/?p=14325 The post TD SR18 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
TOOLS
MANUAL

Details File Size Download
UpdateTime: 2025-02-26
Version: ENG		 2.77MB DOWNLOAD
UpdateTime: 2025-02-261
Version: CHN		 2.78MB DOWNLOAD

FIRMWARE

UpdateTime Version Notes File Size Download
2024-12-20 v3.0.1

– Updated the Calibration and Setting method for Stab functions. (ETHOS v1.6.0 & New v3.0.1 Stab Lua tools are required to update!) (for Stab capable series)
– Changed the ACCZ setting in static from the original -1g to +1g. (for Stab capable series)
– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
=============================================================
For Stab-capable receivers
Step4. Please ensure the latest [V3.0.1] Stab Lua tools have been placed into your radio’s correct folder path (Scripts/StabilizerConfig). (Required by Stab-capable receivers.)
[Note] Please find the Stab Configuration tools in the Device Config Menu, under the Receiver sub-menu.
Step5. Factory Reset operation should be done after updating the Rx firmware, and then Rebound and Reconfiguration (especially the Stab functions including the 6-axis calibration) of all the functions are required. (due to adding the new feature of Fasilsafe data saving on the Rx end.).
 2.31MB DOWNLOAD
2024-07-31 v1.0.13

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (ï¼?000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read �Manual

  330KB DOWNLOAD
2023-11-17 v1.0.11
1. Fixed the issue of incorrect behavior of the Xact servo working in FBUS mode once powering on the receiver.
2. Added the angle control feature for Stabilization mode.
Note: Please set the Roll/Pitch Degree values to 0 by Lua script after updating the firmware.
3. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  264KB DOWNLOAD
2023-07-17 v1.0.6
1. Improved signal performance under strong interference.
2. Reduced the effect brought by engine vibrations for the stabilization function.
3. Solved the abnormal signal output while working with R9 series receivers (via SBUS ports) by deleting the CH16 function (Emergency Mode) under quick mode.
  253KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes
These are the PREVIOUS versions of the Stab Lua script. Please install the latest version through the Lua Library in ETHOS Suite.		 File Size Download
2024-12-20 v3.0.1 1. Updated the Calibration and Setting method for Stab functions. 80KB DOWNLOAD
2024-07-31 v3.0.0 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version.
– TD Series (â‰?.0.13)		 63KB DOWNLOAD
2023-11-20 v2.0.6 1. Added the Roll/Pitch angle control feature for Stabilization mode. 62KB DOWNLOAD
2023-07-27 v2.0.5 1. Added the option to switch between external & internal RF module modes according to the RF link in use. 59KB DOWNLOAD
2023-05-30 v2.0.4 1. Added the settings of the second group of stabilized 5 channels in ACCESS mode. 58KB DOWNLOAD

TOOLS

Tool UpdateTime Version Note File Size Download
RBMixer
(for TD SR18)		 2023-10-11 v1.0 1.The first release for ADV Stabilization feature. 9.06 MB DOWNLOAD

The post TD SR18 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com/td-r18/ Fri, 14 Jan 2022 03:47:13 +0000 //wlyjfw.com/?p=13755 The post TD R18 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime: 2022-03-23
Version: ENG		 639KB DOWNLOAD
UpdateTime: 2023-08-14
Version: CHN		 861KB DOWNLOAD

FIRMWARE

UpdateTime Version Note File Size Download
2025-02-21 3.0.2
1. Fixed the issue of inaccurate ampere telemetry working with the current sensor in the specific hardware version.
 288KB Suite DOWNLOAD
2024-12-20 v3.0.1

– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
  2.31MB DOWNLOAD
2024-01-18 v1.0.12
1. Fixed the issue of missing telemetry working above 25mW RF power in EU mode.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  189KB DOWNLOAD
2023-11-17 v1.0.11
1. Fixed the issue of incorrect behavior of the Xact servo working in FBUS mode once powering on the receiver.
2. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  189KB DOWNLOAD
2023-03-09 v1.0.8
1. Added the 25mW option of the telemetry power. (The telemetry power of 2.4G and 900M bands is synchronized while the option is selected.)
  187KB DOWNLOAD
2022-01-29 v1.0.7  First Release. 187KB DOWNLOAD

The post TD R18 appeared first on 利来·国际 - Lets you set the limits.

]]> 2.4GHz&900MHz TD – 利来·国际 – Lets you set the limits //wlyjfw.com/td-mx/ Tue, 28 Dec 2021 08:24:13 +0000 //wlyjfw.com/?p=13741 The post TD MX appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
MANUAL

Details File Size Download
UpdateTime: 2023-08-29
Version: ENG		 3.21MB DOWNLOAD
UpdateTime: 2023-08-29
Version: CHN		 3.23MB DOWNLOAD

FIRMWARE

UpdateTime Version Note File Size Download
2024-12-20 v3.0.1

– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)
– Optimized the frequency hopping map and CRC algorithm (for TD protocol).

[IMPORTANT] Updating Steps:
Step1. Please ensure the ETHOS radio is flashed with the latest system firmware [V1.6.0].
Step2. Please ensure the Tx firmware has been updated to the latest [V3.0.1].
Step3. Please ensure the Rx firmware has been updated to the latest [V3.0.1].
  2.31MB DOWNLOAD
2024-05-11 v1.0.13
1. Fixed the issue that the receiver would output signal caused by the model ID (saved into the receiver) being unmatched to the selected Model once powering it.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  257KB DOWNLOAD
2023-12-27 v1.0.12
1. Fixed the sensor lost issue of telemetry data from the connected S.Port/FBUS sensors.
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  257KB DOWNLOAD
2023-11-17 v1.0.11
1. Fixed the issue of incorrect behavior of the Xact servo working in FBUS mode once powering on the receiver.
2. Added the support of telemetry data transmission through 2.4G link in the TD mode (The telemetry via 2.4G link can be also achieved under sufficient range with the RF power settings above 25mW in EU mode).
Critical Note: TANDEM TD-ISRM RF Module firmware >=2.2.6 / TD-ISRM Pro >=1.1.13 must be installed. Please use ETHOS Suite to update the RF Module via the FRSK Flasher tab.
  187KB DOWNLOAD
2023-07-12 v1.0.10
1. Added the support of v1.6 hardware.
  187KB DOWNLOAD
2023-03-09 v1.0.9
1. Added the 25mW option of the telemetry power. (The telemetry power of 2.4G and 900M bands is synchronized while the option is selected.)
  187KB DOWNLOAD
2022-10-10 v1.0.8
1. Fixed the compatibility issue to work with MSH helicopter flight control units in FBUS mode.
 187kB DOWNLOAD
2022-01-29 v1.0.7 1. Add option of telemetry OFF.
2. Improve the stability when the power supply is low.
*RF connection works properly when the power supply is between 2.8v-3.5v but Rxbat would be wrong.
3. Improve the stability of the telemetry system.
4. In Racing Mode, SBUS always outputs 16 channels of signal.
Noteï¼?Please upgrade the Tandem modules to 2.2.0 or above accordingly.		 188kB DOWNLOAD
2022-01-26 v1.0.6 1. First Release. 185kB DOWNLOAD

The post TD MX appeared first on 利来·国际 - Lets you set the limits.

]]>