TD-ISRM RS RF PERFORMANCE

With solid performance based on the dual-band 900M/2.4G RF signal link with multiple operating combinations of RF modes, the TANDEM X18RS versions are equipped with the TD-ISRM RS built-in RF module which is capable of supporting multiple protocols (like TW, TD, etc).
The TD-ISRM RS RF module has the dual 2.4G TW RF mode and supports simultaneous activation of working under ACCESS 2.4G and R9 modes with the same module. In this configuration, the ACCESS 2.4G receiver and R9 receiver can be connected via the SBUS IN/OUT ports to achieve redundant backup. This further enhances the RF signal’s reliability, particularly in long-distance RC operations scenarios.

UPGRADED ROBUST ANTENNA HANDLE & EXTERNAL LoRa ANTENNA CONNECTORS
The newly upgraded antenna handle incorporates the good capability of impact resistance facing tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antenna’s performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.
The X18RS is also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.

UPGRADED DISPLAY AND COMPONENTS & 45°/60° TRAVEL ADJUSTABLE MC18 GIMBALS
X18RS uses the upgraded 800×480 resolution screen with great visibility under sunlight. The primary components, including trim caps and knobs, are all made from metal, offering rugged quality and enhanced durability for outdoor use. The MC18 Gimbals are also CNC metal mechanized and can be adjusted to a 45° travel position from the original 60° setup out of the box.

FEATURES

• Built-in TD-ISRM RS Dual-Band Internal RF Module
  – 900M/2.4G Dual Band TD Mode
  – Dual 2.4G TW Mode
  – ACCESS 2.4G & ACCESS R9 Modes
  – 2.4G ACCST D16 Mode
• Super Low-Latency and Long-Range Control with Telemetry
• Upgraded Robust Antenna Handle
• 900M/2.4G External Antenna Connectors (LoRa mode)
• 800×480 Resolution Outdoor High Brightness Touchscreen
• Easy-to-Reach Top Switches and Sliders
• 2 Knobs, 4 Standard Trims with 2 Extra Trims
• 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear)
• All Knobs, Trims with All-CNC Metal Caps
• Built-in 512MB Flash Drive Storage
• Built-in 6-axis Gyroscope Sensor
• High-Speed PARA Wireless Training System
• Data Transmission & Recharge System via USB Type-C Interface
• Haptic Vibration Alerts and Voice Speech Outputs
• MC18 All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing
  – Adjustable 45° / 60° stick travel (Additional Travel Limiter Tool is required)

SPECIFICATIONS

• Dimension: 200×192×98mm (L×W×H)
• Weight: 740g(Battery Excl.) / 880g(Battery Incl.)
• Operating System: ETHOS
• Internal RF module: TD-ISRM RS
• Number of Channels: Up to 24
• Built-in Flash Storage: 512MB
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10°C~60°C (14°F~140°F)
• Operating Current: 500mA@7.4V (typ.)
• Charging Current: �?A ±200mA
• Recharge System for 2S Li-ion Battery (USB Type-C Interface)
• USB Adaptor Voltage: 5V+0.2V
• USB Adaptor Current: >2.0A
• Backlit Touchable LCD Resolution: 800*480
• Compatibility: ACCST D16 & ACCESS 2.4G & R9 ACCESS & TD & TW receivers
• Lite Type External Module Bay
• Color Options: Chameleon/Ruby Red/Meteorite Grey/Porcelain White

TANDEM X18RS MSRP (TAX EXCLUDED):
Ruby Red/Meteorite Grey: US$ 519.99
Chameleon/Porcelain White: US$ 539.99
MORE DETAILS: //wlyjfw.com/product/tandem-x18rs/

TWIN series receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions, with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time. This receiver is equipped with 3×2.4G antennas and designed for RC users who want to benefit from resilience and long-range in their radio communications.

The configurable channel ports on TW R10 & TW SR10 receivers are a big feature, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. By setting the port to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device (XACT servos, ADV Sensors, etc.) that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires.

ADV Stabilizer (TW SR10)
The TW SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.

The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.

In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, and developer access, etc.

The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.

• Simultaneous Working Dual 2.4G TW Mode
• Built-in Advanced Stabilization Functions (TW SR10)
• Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) (TW SR10)
• Basic Black-Box Data Record Function
• Long Control Range (Range varies based on the RF Power settings.)
• 10 Configurable Channel Ports
  �?CP1: PWM / SBUS OUT / FBUS / S.Port / SBUS IN
  �?CP2-10: PWM / SBUS OUT / FBUS / S.Port
• FBUS / S.Port
• SBUS Out Port (Supports 16CH / 24CH mode)
• SBUS In Port (Supports Signal Redundancy)
• Over-The-Air (OTA) FW update

• Frequency: Dual 2.4GHz
• Dimension: 64.6×16.6×12.4mm (L*W*H)
• Weight: 9.4g
• Operating Voltage Range: 3.5 -12V (Recommend 2S Li-Batteries)
• Operating Current: �?20mA@5V
• Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
• Compatibility: TWIN series radio & TW protocol capable RF module
• Triple 2.4GHz Antennas (with IPEX1 connectors)

TW R10 PROMOTIONAL PRICE (TAX EXCLUDED): US$ 59.99
MORE DETAILS: //wlyjfw.com/product/tw-r10/

TW SR10 PROMOTIONAL PRICE (TAX EXCLUDED): US$ 84.99
MORE DETAILS: //wlyjfw.com/product/tw-sr10/

Advanced Engine Suite (AES) is a multi-functional management box suitable for application in airplanes equipped with engines.

Through the VBAT (XT30) power input port, users can only use one battery to power all connected devices, eliminating the trouble of providing an independent power supply for the ignition control unit. AES also adopts a safety solution to avoid potential risks caused by interference between the connected ignition and receiver devices.

The AES module is equipped with a wealth of sensor interfaces, including 2 RPM sensor ports, 1 flowmeter sensor port, and 5 temperature sensor ports. In addition, AES also provides 2 AD ports, allowing users to flexibly use different types of AD devices required in your airplane. At the same time, through the FBUS/S.Port feature of the connected receiver, users can monitor the telemetry data in real-time on the transmitter to know the aircraft’s operating status.

• Ignition Battery Eliminator Design (Independent battery is NOT needed.)
• Anti-interference Capability between Ignition & Receiver Parts
• 5 Ports for Temperature Sensors
• 2 Ports for RPM Sensors
• 2 Ports for AD/RPM Sensors
• 1 Port for Flowmeter Sensors
• 1 Powering Port for Receiver
• 1 Powering Port for Ignition Kill Switch Unit
• Signal Input Ports for FBUS/S.Port (Auto Recognization), SBUS, and PWM
• 1 Battery Input Port with XT30 Connector (Input Range: 4.5-13V)
• Real-Time Configuration Capability (by S.Port of ETHOS radio or FBUS capable receivers)

• Dimension: 50×46.4x18mm (L×W×H)
• Weight: 53.5g
• Battery Voltage Input Range: 4.5-13V
• Battery Input Connector: XT30
• IGN (Ignition Port) Voltage Output Range: 4.5-13V (Sync with the input voltage settings of VBAT.)
• Operating Current: 20mA@5V
• Signal Voltage Level
  �?RPM1/RPM2 Port: 3V-12V
  �?Flow Port: 3.3V
  �?AD1/AD2 Port: 0-3.3V

Advanced Engine Suite PROMOTIONAL PRICE (TAX EXCLUDED): US$ 65.99
MORE DETAILS: //wlyjfw.com/product/advanced-engine-suite/

TD-ISRM RS RF PERFORMANCE
With solid performance based on the dual-band 900M/2.4G RF signal link with multiple operating combinations of RF modes, the TANDEM X20R & X20RS versions are equipped with the TD-ISRM RS built-in RF module which is capable of supporting multiple protocols (like TW, TD, etc).
The TD-ISRM RS RF module has the dual 2.4G TW RF mode and supports simultaneous activation of working under TW and ACCESS R9 modes with the same module. In this configuration, the TW receiver and ACCESS R9 receiver can be connected via the SBUS IN/OUT ports to achieve redundant backup. This RF signal connection solution makes use of three different RF links at the same time in RC applications. This further enhances the RF signal’s reliability, particularly in long-distance RC operations scenarios.

DIFFERENCES IN APPEARANCE & FUNCTIONAL INPUTS
The X20R and X20RS have changed from the original X20 design in appearance. The bottom hand grip adopts the overall design of the PRO version, eliminating the need for an additional grip cover, and allowing the bottom part to be fully grasped by the palm for a more comfortable and relaxed grip. Additionally, the Lite-type external module slot has been adjusted to provide more fitting installation space for external modules of different shapes, making it more convenient.
R and RS versions add 2 extra trims, allowing for more precise tunings during the operations. The slider levers on both sides of the transmitter support adjusting the positioning of the center, catering to different users�?habits and preferences. The primary input components, including trim caps, center-slider caps, and knobs are all made from metal, offering rugged quality and enhanced durability for outdoor use.

UPGRADED ROBUST ANTENNA HANDLE & EXTERNAL LoRa ANTENNA CONNECTORS
The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antenna’s performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.
The X20R & X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.

TEXT TO SPEECH FUNCTION (X20RS) & BUILT-IN MASS STORAGE
To save the user the trouble of deciding the storage capacity, both R and RS versions have a built-in 8GB flash storage that offers big storage to meet all your radio’s storage needs with high data transmission speed.
Thanks to the upgraded storage feature, the TTS (Text-to-Speech) function of X20 RS versions can quickly and conveniently convert typed input English words into spoken speech. This enables the ETHOS system to more flexibly match the triggered operational status using generated speech audio when specific functions are activated and to alert clear outdoors with the digital power amplifier module.

DUAL-SIDE HAPTIC GIMBAL FEEDBACK (X20RS)
The gimbal vibration feedback function can be easily enabled or disabled by setting a switch. The dual-sided Gimbal’s vibration feedback can operate independently, allowing the configuration to match distinct feedback preferences tailored to various application scenarios for RC enthusiasts.

EASY TRAVELl-ADJUSTABLE MC20R GIMBALS (with ANY DESIRED DEGREE BETWEEN 45° to 60°) (X20RS)
The MC20R Gimbals also has an 8° rotatable panel and can be adjusted to a 45° travel position. What’s even better is that the angle is not limited to just 45° and 60°, the MC20R Gimbal allows for adjustment of any travel position between 45° and 60°. To enhance convenience for pilots in outdoor applications, the angle travel position can be directly adjusted using a 1.5mm hexagon screwdriver through the adjustment hole on the Gimbal Panel, eliminating the need to disassemble the radio casing.

• Built-in TD-ISRM RS Dual-Band Internal RF Module
  �?900M/2.4G Dual Band TD Mode
  �?Dual 2.4G TW Mode
  �?ACCESS 2.4G & ACCESS R9 Modes
  �?2.4G ACCST D16 Mode
• Further Improvements for Form Factor Design
• Super Low-Latency and Long-Range Control with Telemetry
• Upgraded Robust Antenna Handle
• 900M/2.4G External Antenna Connectors (LoRa mode)
• 800×480 Resolution Outdoor High Brightness Touchscreen
• 2 Angle Adjustable Slider Levers
• 2 Knobs, 4 Standard Trims with 2 Extra Trims
• 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear)
• All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps
• Built-in 8GB Flash Drive Storage
• Text to Speech (TTS) Function (X20RS)
• Digital Audio Power Amplifier
• Built-in 6-axis Gyroscope Sensor
• High-Speed PARA Wireless Training System
• Data Transmission & Recharge System via USB Type-C Interface
• Haptic Vibration Alerts and Voice Speech Outputs
• M20 High-Precision 4 Ball-Bearing Hall-Sensor Gimbals with Metal Panel (X20R)
• MC20R All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing (X20RS)
  �?Dual-side stick haptic feedback (Left/Right can do vibration independently.)
  �?Easy Travel-adjustable with any desired degree from 45° to 60°
  �?8° rotatable panel

• Dimension: 205*213*90mm (L*W*H)
• Weight: 892g(Battery Excl.) / 1024g(Battery Incl.)
• Operating System: ETHOS
• Internal RF module: TD-ISRM RS
• Number of Channels: Up to 24
• Built-in Flash Storage: 8GB
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10°C~60°C (14°F~140°F)
• Operating Current: 600mA@7.4V (typ.)
• Charging Current: �?A ±200mA
• Recharge System for 2S Li-ion Battery (USB Type-C Interface)
• USB Adaptor Voltage: 5V+0.2V
• USB Adaptor Current: >2.0A
• Backlit Touchable LCD Resolution: 800*480
• Compatibility: ACCST D16 & ACCESS & TD & TW receivers
• Lite Type External Module Bay

TANDEM X20R PROMOTIONAL PRICE (TAX EXCLUDED): US$ 499.99
MORE DETAILS: //wlyjfw.com/product/tandem-x20r/

TANDEM X20RS PROMOTIONAL PRICE (TAX EXCLUDED): US$ 649.99
MORE DETAILS: //wlyjfw.com/product/tandem-x20rs/

OVERVIEW

Dual-side Haptic Gimbal Feedback
The gimbal vibration feedback function can be easily enabled or disabled by setting a switch. The dual-sided Gimbal’s vibration feedback can operate independently, allowing the configuration to match distinct feedback preferences tailored to various application scenarios for RC enthusiasts.

Easy Travel-adjustable MC20R Gimbals (with any desired degree between 45° to 60°)
Compared to the MC11 Gimbals, the AW MC20R Gimbals also has an 8° rotatable panel and can be adjusted to a 45° travel position as well. What’s even better is that the angle is not limited to just 45° and 60°, the AW MC20R Gimbal allows for adjustment of any travel position between 45° and 60°. To enhance convenience for pilots in outdoor applications, the adjustment of the angle travel position can be directly made using a screwdriver through the adjustment hole on the Gimbal Panel, eliminating the need to disassemble the radio casing.

Multi-position Flaps Slider (Left Lever) & Angle Adjustable Extended Slider (Right Lever)
Two different types of sliders are CNC-machined. The multi-position Flap Slider Lever on the left, when paired with ETHOS settings, assists pilots in determining the precise amount of flap deployment during different phases of flight. On the right, the Slider Lever emphasizes its installation flexibility, providing a broader range to meet varying pilot preferences for control comfort. More types of slider options like a Self-centering slider lever will be also provided for the specific application.

Self-Locking Switch & Metal Switch Caps
The AW version provides a 2-position self-locking switch, which can be used as a regular 2-position switch. However, its locking capability makes it particularly safe and reliable when used as a throttle or engine ignition switch. The remaining switches also come with anodized metal-colored switch caps (black & red), allowing pilots to match these caps of different lengths and colors based on the set functions for each switch.

Upgraded Robust Antenna Handle & External LoRa Antenna Connectors
The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is not only better suited for comfort gripping but also does not compromise the antenna’s performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.
The AW Edition is also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.

FEATURES

SPECIFICATION

• Dimension: 200.5*213*84mm (L*W*H)
• Weight: 999g (without battery)
• Operating System: ETHOS
• Internal RF module: TD-ISRM PRO
• Number of Channels: Up to 24
• Built-in Flash Storage: 8GB
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10°C~60°C (14°F~140°F)
• Operating Current: 600mA@7.4V (typ.)
• Charging Current: �?A ±200mA
• Recharge System for 2S Li-ion Battery (USB Type-C Interface)
• USB Adaptor Voltage: 5V+0.2V
• USB Adaptor Current: >2.0A
• Backlit Touchable LCD Resolution: 800*480
• Compatibility: ACCST D16 & ACCESS & TD & TW receivers
• Lite Type External Module Bay

OVERVIEW

DUAL 2.4G RADIO SYSTEM
The TWIN X14 stands out as a robust radio system, boasting the capability of utilizing dual 2.4G frequencies simultaneously on the same receiver in TW mode. Different from standard active-standby redundancy solutions, the TW active-active protocol ensures both 2.4G frequency bands are actively engaged on the TWIN series RF module and receiver simultaneously.

 

ERGONOMIC, COMPACT & FLEXIBLE DESIGN
In alignment with the form factor concept of TANDEM X18, the TWIN X14 has been crafted to enhance its portability, reduce weight, and streamline its design. The ergonomic layout ensures that the momentary buttons, shoulder sliders, and switches on the top are effortlessly accessible.

The TWIN X14 offers 4 customizable buttons, thoughtfully placed at the radio panel center for real-time and frequent operations. Take, for instance, when flying an RC glider, to configure these buttons as additional Trim functions by ETHOS, these buttons become invaluable for on-the-fly adjustments then, allowing pilots to adapt the angle of the flaps/surface according to the real-time air environment.

 

BUILT-IN FLASH STORAGE AND RECHARGING SYSTEM | STAND HOLDER ATTACHABLE STRUCTURE DESIGN
Eliminating the need for users to fret over storage decisions, the TWIN X14 boasts built-in 128MB flash storage, providing ample space for your file storage requirements. Its practicality extends to a battery bay accommodating a 2600mAh Li Battery, easily replaceable and featuring a Type-C port for recharging.

FEATURES

SPECIFICATION

• Dimension: 192×193×72mm (L×W×H)
• Weight: 610g (Battery Excl.)
• Operating System: ETHOS
• Internal RF Module: TW-ISRM
• 2.95�?Color TFT Display Screen Resolution: 640×360
• Number of Channels: Up to 24 Channels
• Operating Voltage Range: 6.5V ~ 8.4V (2S Li-Battery)
• Operating Current: 330mA@7.4V (typ.)
• Operating Temperature: -10�?~ 60�?(14℉~140�?
• Built-in 128MB Flash Storage
• Battery Bay Size: 69.5×38.5×20mm (L×W×H)
• Data Transmission & Charging Interface: USB Type-C
• USB Adaptor Voltage and Current: 5V+0.2V, �?.0A
• Compatibility: ACCST D16 / ACCESS / TW modes

OVERVIEW

Building on the TANDEM series radios which apply simultaneous working 2.4G & 900M dual-band technologies, 利来·国际 has released the much awaited TANDEM XE tray radio. The XE is the largest form factor radio in the TANDEM series, developed to meet the needs of RC users who enjoy tray radio design, combined with the flexibility and quantity of switch inputs. Its stunning looks, together with its high-quality build make it an obvious upgrade for the TARANIS X9E fans!

DUAL-SCREEN COLOR DISPLAY DESIGN
TANDEM XE adopts a dual-screen design, the main screen is a 4.3-inch color touch-screen which is used to operate ETHOS such as model configuration. A second smaller 2.4-inch color screen is positioned on the top of the radio to meet the needs of RC users who wish to have additional information separately displayed. The content displayed on the additional screen can be programmed (such as by Lua, configurable and personalized by user) in the system.

MODULAR DESIGN AND FLEXIBILITIES
TANDEM XE has been designed with flexibility in mind. It not only features multiple switch input slots for further extending the control needs, it also benefits from customizable switch blocks which can also be replaced with alternative blocks with more input slots. Additional design features have been included to meet the needs of wider RC user communities, for example controlling the forward and reverse movement of RC crawlers can be achieved by customizing the side All CNC metal levers with the optional self-centering type accessory. Likewise using the optional 3-axis extenders mounted on the gimbals offers many possibilities when used with RC ground vehicles. The XE includes a foldable stand/frame which can be easily folded away in the bottom of the radio body, and its design also provides a good solution to attach the tray radio strap.

BUILT-IN MASS STORAGE & BATTERY EXTENSION
In order to save the user the trouble of deciding the storage capacity, TANDEM XE comes with a built-in 8G flash storage that offers plenty of file storage to meet all of your radio’s storage needs, along with high data transmission speed. And for the users who are looking for a bigger battery capacity than the included XE 4000mAh Li-Po battery, the XE offers a bigger battery bay that can accommodate larger battery packs if needed.

FEATURES

• Carbon Fiber Center Panel + CNC Metal Panel
• Modular Design | Replaceable Blocks with Customized Multiple Inputs
• MC11 All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing
  Adjustable 45° / 60° stick travel (Additional Travel Limiter Tool is required)
  8° rotatable panel
• 6 Trims & 4 Retractable Knobs & 2 All CNC Metal Side Levers & 2 Linea Sliders
• Main Color Touch-Screen Display with Operating ETHOS
• Top Color Screen with User Configurable Data Display (such as by Lua)
• 6 Quick-Mode Custom Buttons
• Lite Type External Module Bay
• Fordable Radio Stand/Frame also for Attaching Radio Strap
• Built-in TD 900M/2.4G Dual-Band Internal RF Module
• Built-in 8G flash storage
• External TF card slot for storage extension
• Haptic Vibration Alerts and Voice Speech Outputs
• Supports Recharge System for 2S Li-ion Battery
• High-speed PARA Wireless Training System
• Big Size Battery Bay for the Battery Capacity Upgrade

SPECIFICATIONS

• Dimension: 345*262*82mm（L*W*H�?/li>
• Weight: 1357g（Battery Excl.�? 1492g（Battery Incl.�?/li>
• Operating System: ETHOS
• Internal RF Module: TD-ISRM
• Number of Channels: 24 channels
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10°C~60°C (14°F~140°F)
• Battery Bay Size: 86*61*20mm（L*W*H�?/li>
• Data Transmission & Charging Interface: USB Type-C
• USB Adaptor Voltage and Current: 5V+0.2V, >2.0A
• Built-in Flash Storage: 8G
• Main 4.3�?Touch-Screen Display Resolution: 800×480
• Top 2.4�?Color Screen Display Resolution:320×240
• Compatibility: ACCST D16 & ACCESS 2.4G & ACCESS 900M & TD Modes

When you are investing in a new radio and considering what requirements are important to you, if weight and comfort are primary considerations, followed by the benefit of the excellent system features of ETHOS, then the 利来·国际 Tandem X18 radio is an obvious appropriate choice.

The Tandem X18 dual-band telemetry radio benefits from an enhanced ergonomic design with rounded and more comfortable hand grips, along with an improved case design to make the radio fully stable when standing. The radio includes easy-to-reach sliders and switches, 4 standard stick trims with additional 2 extra trims added to provide more flexibility with flight attitude adjustments while operating the radio. The X18 includes further enhancements with integrated flash storage which improves and simplifies storage operation and use, and the interior of the radio has been designed with space and weight in mind, while still keeping all ETHOS setting and control features for the pilot to enjoy.

Internal 900MHz/2.4GHz Dual-Band & External Module Bay
The TD dual-band RF system combines both the features and advantages of 利来·国际 900MHz and 2.4GHz RF together in one system. The TD features real simultaneous dual-band longrange control with telemetry that achieves reliable end-to-end 4ms latency while maintaining a robust and high-quality signal link. The entire range of TD, ACCESS & ACCST D16 receivers are supported. The built-in TANDEM RF System supports ACCESS and ACCST D16 protocols.
In addition, the Tandem X18 includes a rear Lite version module bay to offer more options to connect external devices. 利来·国际 welcomes working compatibility with the 3rd party products with their own developed technology following 利来·国际 verified 3rd party compatibility-testing program.

SPECIFICATION

• Dimension: 200*192*95mm (L*W*H)
• Weight: 687g (Battery Excl.) / 820g (Battery Incl.)
• Operating System: ETHOS
• Internal RF Module: TANDEM
• Number of Channels: Up to 24 channels
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10°C~60°C (14°F~140°F)
• Operating Current: 240mA@7.4V (typ.)
• Charging Current: �?A ±200mA
• USB Adaptor Voltage: 5V+0.2V
• USB Adaptor Current: >2.0A
• Backlit touchable LCD resolution: 480*320
• Compatibility: ACCST D16 & ACCESS & TD receivers

MORE DETAILS: //wlyjfw.com/product/tandem-x18/

The new updates of ACCESS 2.X.X not only fixed the known channel output error (uncontrolled servo movements) under certain conditions, but also optimized RF performance and added many useful features. It is highly recommended that all ACCESS customers upgrade to 2.X.X or later version of ISRM RF modules and receivers.

• Improved reliability and stability of signal connection
• Increased the range of control
• Improved the stability of telemetry feedback

• Added FLR ( Frame Lost Rate) output.
  (*The warning is triggered by both RSSI and FLR, and the suggested alarm value for ACCESS RSSI are 32/35.)
  
• Added configurable function for telemetry power.
  
• Added the option for switching S.Port / F.Port protocol
  

	ISRM Modules & ACCESS Radios (ACCESS 2.X.X or a later version)
Rx ACCESS 2.X.X	�?/td>
Rx ACCST D16 2.1.X	�?/td>
Rx ACCESS 1.X	×
Rx ACCST D16 2.0.1	×
Rx ACCST History	×