RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com Fri, 21 Jul 2023 05:22:54 +0000 en-US hourly 1 //wordpress.org/?v=5.9 //wlyjfw.com/wp-content/uploads/2017/04/cropped-topbg-Copy-100x100.png RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com 32 32 RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-sr10-pro/ Wed, 09 Sep 2020 03:25:56 +0000 //wlyjfw.com/?p=13132 The post ARCHER SR10 PRO appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-28
Version  :  20220228		 4.92MB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7 Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2021-01-27 v2.02 Added option to support setting whether or not gyro is enabled after failsafe.
Lua files for radios running openTx.		 136KB DOWNLOAD
2020-11-10 v2.01   Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post ARCHER SR10 PRO appeared first on 利来·国际 - Lets you set the limits.

]]> RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-sr8-pro/ Wed, 09 Sep 2020 03:23:30 +0000 //wlyjfw.com/?p=13130 The post ARCHER SR8 PRO appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-28
Version  :  20220228		 4.81MB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7 Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2021-01-27 v2.02 Added option to support setting whether or not gyro is enabled after failsafe.
Lua files for radios running openTx.		 136KB DOWNLOAD
2020-11-10 v2.01   Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post ARCHER SR8 PRO appeared first on 利来·国际 - Lets you set the limits.

]]> RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com/archer-sr6/ Wed, 09 Sep 2020 03:18:07 +0000 //wlyjfw.com/?p=13128 The post ARCHER SR6 appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-25
Version  :  20220225		 4.78MB DOWNLOAD
“How to�about ACCESS receiver
UpdateTime  :  2020-07-22
Version  :  20200722		 176kB DOWNLOAD

FIRMWARE

* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
UpdateTime Version Note File Size Download
2023-07-21 v2.1.14 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).

Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version.
—————————————————————————————
Compatibility | ISRM Modules & ACCESS Radios
————————————————————————————–
ISRM-N �(Taranis X9 Lite & QX7 ACCESS & QX7S ACCESS)
ISRM-S-X9LITES �(Taranis X9 Lite S)
ISRM-S-X9DP2019 �(Taranis X9DP 2019 & X9DP 2019 SE)
ISRM-S-XLITES �(Taranis XLite S)
ISRM-Pro �(Taranis XLite Pro)
ISRM-S-X10E �(Horus X10 EXPRESS & X10S EXPRESS)
ISRM-S-X10S �(ACCESS Upgrade Module)

 219KB DOWNLOAD
2023-02-23 v2.1.12 Fixed the issue of telemetry loss and receiver reboot caused by using the ADV sensors together with Xact servos. 217KB DOWNLOAD
2022-03-22 v2.1.10 1. Enter the self-check mode through configuration, which facilitates operation and improves system security.
(for RX with stabilization function).
2. Improve FBUS baud rate and adapt to the latest Xact servo update.
Note: For ETHOS-based radio onlyï¼?please update the ETHOS to v1.1.2 or above to use.		 217KB DOWNLOAD
2021-11-01 v2.1.9 1. Optimize the gyroscope algorithm to improve the adaptability with models under strong vibration.
2. Add SBUS 24-channel mode (ETHOS to be updated to work with).
3. Add Acc-X /Y/Z sensor and Angle output for SRx receivers.		 217KB DOWNLOAD
2021-07-20 v2.1.8 1. Fixed the issue that telemetry lost alarms from time to time.
2. Fixed the issue that Vario updating is slow for GR6 & GR8.		 213KB DOWNLOAD
2021-04-19 v2.1.7  Resolved the issue of that RXSR not starting properly when working with RXSR (RXSR as slave receiver) in redundancy mode . 213KB DOWNLOAD
2021-01-27 v2.1.6 1. Added option to support setting whether or not gyro is enabled after failsafe(for SRx receivers & LUA updates needed).
2. Fixed the issue that the default pin assignment for PIN6 was CH1(SR6 only).
3. Fixed a bug where the AUX channel was limited in scope (for SRx receivers).
4. Fixed a bug where OTA upgrades could not be made in redundant state.
5. Fixed an issue with pinmap reset after deleting a receiver bound.
6. Added protection algorithm for self-check mode triggered by mistake in flight.		 213KB DOWNLOAD
2020-10-28 v2.1.5 1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see readme file) and fix the issue of requiring registration to show the correct receiver version after OTA.
3. Limit the output range of SBUS/F.PORT to 885uS ~ 2115uS.		 213KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2021-01-27 v2.02 Added option to support setting whether or not gyro is enabled after failsafe.
Lua files for radios running openTx.		 136KB DOWNLOAD
2020-11-10 v2.01   Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post ARCHER SR6 appeared first on 利来·国际 - Lets you set the limits.

]]> RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com/r9-stab-ota/ Mon, 28 Oct 2019 06:41:12 +0000 //wlyjfw.com/?p=12230 The post R9 STAB OTA appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
ACCESS FIRMWARE
ACCST FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
UpdateTime  :  2022-02-28
Version  :  20220228		 3.03MB DOWNLOAD

ACCESS FIRMWARE

*Note: Please use the FLEX firmware according to the RC regulation of local area.

UpdateTime Version Notes File Size Download
2022-03-22  v1.3.2 1. Fix the output saturation problem caused by excessive vibration.
2. Enter the self-check mode through configuration, which facilitates operation and improves system security.
Note: For ETHOS-based radio only�please update the ETHOS to v1.1.2 or above to use.		  418KB DOWNLOAD
2020-04-30  v1.3.1  Fixed interference with multiple modules and receivers working together.  415KB DOWNLOAD
2020-04-2  v1.3.0 1. Improved RF performance.
2. Added the telemetry for LFR (Lost Frame Rate).
3. Please upgrade module & radio firmware accordingly.		  415KB DOWNLOAD
2020-01-16  v1.2.0 1. Fix bug with telemetry.
2. Optimize CRC check algorithm and improve error correction ability.
3. Please update your module & receiver firmware accordingly.		  326KB DOWNLOAD

 

UpdateTime Version Notes File Size Download
2020-01-16  v1.2.0 1. Fix bug with telemetry.
2. Optimize CRC check algorithm and improve error correction ability.
3. Please update your module & receiver firmware accordingly.		  419KB DOWNLOAD
2019-11-06  v1.1.2   First release for ACCESS compatible firmware.  415KB DOWNLOAD

ACCST FIRMWARE

*Note: Please use the FLEX firmware according to the RC regulation of local area.

UpdateTime Version Notes File Size Download
2020-08-18  200727  ACCST Firmware for R9 STAB OTA.  373KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2022-03-23 v2.03 Added options to enter the self-check mode through Lua, which facilitates operation and improves system security.
Lua files for radios running openTx.		 129KB DOWNLOAD
2020-07-06 200706 1. Update Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post R9 STAB OTA appeared first on 利来·国际 - Lets you set the limits.

]]> RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com/s8r/ Thu, 10 Aug 2017 17:28:19 +0000 //119.28.60.203/?p=6494 The post S8R appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
FIRMWARE
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
Compatiblity  :  S6R  /  S8R
UpdateTime  :  2021-07-08
Version  :  20210708		 5.78MB DOWNLOAD

CERTIFICATE

UpdateTime Version Notes File Size Download
2017-06-12 170612 265KB DOWNLOAD

FIRMWARE

UpdateTime Version Notes File Size Download
2021-07-08 ACCST D16 2.1.2 (FCC only)  Fixed the issue of the telemetry update is slow when work with X20/X20S.

Note: Update is not needed for LBT mode.

 110KB DOWNLOAD
2020-06-24 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.SXR_ACCST_2.1.0_vtail_FCC/LBT.frk
(For users who intend to make a new model building and configuration, this firmware fits all model types. With this firmware on a configured receiver, users need to re-configure the receiver again.)SXR_ACCST_2.1.0_FCC/LBT.frk
(More convenient to use for the users who have already configured the model.)		 855kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 422kB DOWNLOAD
2019-06-05 190531 1. Fix the issue that for some of the Rx No. ,binding is not possible.
2. Optimised the lua support when using SxR to set other devices like sensors,esc .etc.		 446KB DOWNLOAD
2018-11-27 181108 Improve the accuracy of voltage detection. 216KB DOWNLOAD
2018-04-18 180328 Fix the bug 217KB DOWNLOAD
2017-12-27 171213 Fix the VTAIL error 217KB DOWNLOAD
2017-10-26 171018 solve the issue about lua script 217KB DOWNLOAD
2017-09-05 170816  fix the ACC calibrate bug of the yaw 225KB DOWNLOAD
2017-03-07 170217 225KB DOWNLOAD
2017-02-14 170112 225KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2020-07-06 200706 1. Update Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post S8R appeared first on 利来·国际 - Lets you set the limits.

]]> RECEIVER LUA SCRIPT – 利来·国际 – Lets you set the limits //wlyjfw.com/s6r/ Thu, 10 Aug 2017 17:22:02 +0000 //119.28.60.203/?p=6512 The post S6R appeared first on 利来·国际 - Lets you set the limits.

]]>
MANUAL
CERTIFICATE
FIRMWARE
HOW TO-S.Port Products
LUA SCRIPT
利来·国际 FreeLink APP (PC)
MANUAL

Details File Size Download
Compatiblity  :  S6R  /  S8R
UpdateTime  :  2021-07-08
Version  :  20210708		 5.78MB DOWNLOAD

CERTIFICATE

UpdateTime Version Notes File Size Download
2017-06-12 170612 265KB DOWNLOAD

FIRMWARE

UpdateTime Version Notes File Size Download
2021-05-13 ACCST D16 2.1.1 (FCC only)  Fixed the issue of the telemetry update is slow when work with X20/X20S.
Note: Update is not needed for LBT mode.		 212KB DOWNLOAD
2020-06-24 ACCST D16 v2.1.0 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.SXR_ACCST_2.1.0_vtail_FCC/LBT.frk
(For users who intend to make a new model building and configuration, this firmware fits all model types. With this firmware on a configured receiver, users need to re-configure the receiver again.)SXR_ACCST_2.1.0_FCC/LBT.frk
(More convenient to use for the users who have already configured the model.)		 855kB DOWNLOAD

History firmware DOWNLOAD (not compatible with v2.x.x)

UpdateTime Version Notes File Size Download
2020-01-16 ACCST

D16 v2.0.1

 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions.
2.Strengthened correction and verification capability.
Note: Please update the firmware of all your radios, RF modules and receivers accordingly.		 422kB DOWNLOAD
2019-06-05 190531 1. Fix the issue that for some of the Rx No. ,binding is not possible.
2. Optimised the lua support when using SxR to set other devices like sensors,esc .etc.		 446KB DOWNLOAD
2018-04-17 180328 Fix the bug 225KB DOWNLOAD
2017-12-27 171204 Fix the bug that compensates is not correct in VTAIL mode. 225KB DOWNLOAD
2017-09-05 170706 1.fix the RSSI too high issue.
2.change pc config program’s name.
3.lua script adds convenient mode select.		 225KB DOWNLOAD
2017-06-29 170615 1. Fix the RSSI issue
2. Add config convenient mode		 14.3MB DOWNLOAD
2017-01-11 161226 1. Fix the bug of jump of channel 5-8
2. Channel pass midpoint 3 times in 3 seconds will enter self-check
3. PC config add load and save config file
4. In DELTA, the rudder stabilization will have no effect when CH10 in the center
5. RF adapt to DH16V2
6. Channel AUX1 or AIL2, AUX2 or ELE2 can be selected in S6R
7. Fix CRC bugs in S6R/STK/PC config
8. Message queue will be reset when time out in STK
9. Rud with stabilization in delta wing modS6R/STK/PC config/Lua script all needs update.		 14.4MB DOWNLOAD

HOW TO-S.Port Products

Details UpdateTime Version File Size Download
Compatiblity  :  XJT  /  X8R  /  Vari-H  /  FLVSS  /  GPS  /  X6R  /  FAS150S  /  X4R  /  X4RSB  /  RPM  /  Taranis X9D Plus  /   FSD  /  Horus X12S  /  ASS-100  /  ASS-70  /  XSR  /  Redundancy Bus  /  MLVSS  /  Vari-N  /  S6R
MD5  :  4E8CC5F9272D414E7286F1557A10B371		 2017-01-12 170109 10.7MB DOWNLOAD
2016-06-21 160615 801KB DOWNLOAD
2013-09-22 130922 201KB DOWNLOAD

LUA SCRIPT

UpdateTime Version Notes File Size Download
2020-07-06 200706 1. Update Lua files for radios running openTx. 134KB DOWNLOAD

利来·国际 FreeLink APP (PC)

Details Note File Size Download
Compatiblity  :  STK  /  S.Port AirLink / S.Port AirLink S
UpdateTime  :  2022-02-15
Version  :  3.5		   Update for Xact servos . 4.74 MB DOWNLOAD

The post S6R appeared first on 利来·国际 - Lets you set the limits.

]]>