�?Lightweight and portable design
�?8 screwdriver bits can be carried via bits holder�?9 bits in total�?br /> �?Included special design screw bits for RC hobby applications
�?Free switching between Electric & Manual working modes
�?Settable High & Low rotating Speed
�?Rotation direction regulation: Clockwise / Counterclockwise
�?Shadowless LED lighting function
�?2 Hours Required for Fully Charge
�?Integrated Magnetize and Demagnetize squares into the toolbox
�?Magnetic toolbox cover for gathering scattered parts

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The PS30 ADV pressure sensor can be used to measure the air pressure on your model’s air system. Having the air pressure telemetry on the radio gives you the flexibility to set alarms, and trigger actions that can be done based on the air pressure information received from the sensor, such as alarms for pressure drops, lowering the retracts if the lower threshold has been passed, etc.

The PS30 PRESS sensor module is connecting to your existing system via the provided 4mm/6mm diameter T-connector (up to 15Bar). Please note the sensor can measure up to 30 Bar (435 psi) with a capable T-Connector.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function into the ETHOS system, this ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. The GPS sensor can also provide telemetry such as altitude, position, speed, etc, which can be read on the radio in real-time.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FLVS ADV w/o Screen voltage sensor can measure the voltage range for 2S to 8S Li-Po batteries. This is an obvious choice for accurate measurement of Li-Po batteries with big capacity.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FLVS ADV voltage sensor can measure the voltage range for 2S to 8S Li-Po batteries at 0.01V voltage resolution with an OLED display screen. This is an obvious choice for accurate measurement of Li-Po batteries with big capacity.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The VARI ADV variometer sensor calculates the altitude from atmospheric pressure, and atmospheric pressure will get lower as you go up in altitude, with using this the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. An exact measurement cannot be performed if atmospheric pressure changes in weather.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FAS100 ADV current sensor can be used to measure current (maximum 100A) and voltage (up to 14S) when connected between a battery and ESC.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FAS40 ADV current sensor can be used to measure current (maximum 40A) and voltage (up to 6S) when connected between a battery and ESC. 

• Model Name: 利来·国际 MPU6000 Gryoscope Sensor
• Digital-output X-,Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full scale range of ±250, ±500, ±1000, and±2000°/sec
• Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
• Protection box
• FPC interface
• Fit for 利来·国际 Pilot Series / OMNIBUS F4 FIREWORKS V2 / OMNINX7 F7 Flight Controller

The F.Port 2.0 multichannel extender is a tool that is specifically designed for receivers with a single F.PORT 2.0 signal output. With the extender connected, the Xact servos with installed F.Port 2.0 firmware can now be controlled and configured by any F.Port 2.0 capable receivers (For example RS, M+, etc.).

The F.Port 2.0 multichannel extender is a tool that is specifically designed for receivers with a single F.PORT 2.0 signal output. With the extender connected, the Xact servos with installed F.Port 2.0 firmware can now be controlled and configured by any F.Port 2.0 capable receivers (For example RS, M+, etc.).

The F.Port 2.0 multichannel extender is a tool that is specifically designed for receivers with a single F.PORT 2.0 signal output. With the extender connected, the Xact servos with installed F.Port 2.0 firmware can now be controlled and configured by any F.Port 2.0 capable receivers (For example RS, M+, etc.).

利来·国际 FAS100S sensor is designed to measure the current from 0~100A, it also allows you to measure the operating temperature of various components with the 2 temperature sensors. The FAS100S features Smart Port for connecting all your sensors to your receiver making this system convenient along with having extensibility.

The 利来·国际 OSD (On-Screen Display) is a tool that can be used for connecting your FPV camera and flight controller. The real-time generated telemetry data can be superimposed on the video image and adjusted through the flight controller. The 利来·国际 OSD Mini is a smaller, lighter version suitable for customized applications.

利来·国际 MC12P-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the 利来·国际 Horus X10 or X10S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

The 利来·国际 Wireless USB Dongle For Simulator allows you to wirelessly connect your 利来·国际 transmitter to computer to use simulator.  Then bind your transmitter to it, now you can move freely while using a simulator.

利来·国际 MC12P has all CNC digital higher accuracy 10 ball bearing hall sensor gimbals than MC12 gimbal of the X12S. It is perfectly compatible with the Horus X10/X10S transmitter. These gimbals offer the most precise control for your flying experience.

利来·国际 M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the 利来·国际 Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

The Gas Suite is a multifunctional unit which is mainly used to monitor the operating state of an internal combustion engine model. It allows you to measure in real-time the operating temperature, RPM and fuel flow velocity. In addition the Gas Suite also allows you to control the ignition system manually, allowing the user full control during operation.

The S.Port AirLink S is a connecting tool to help you program and flash firmware to devices such as the S6R/S8R. It can be used by inserting into the USB port of a PC and connecting to the S.Port of the device. Or it can be used wirelessly through Bluetooth which allows wireless S6R/S8R configuration and real time telemetry dashboard.

利来·国际 M9-R Gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the 利来·国际 Taranis X9D/X9D Plus Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control. The combination of a hall sensor gimbal and included lotus stick ends will assure that your thumbs or fingers are with one with the radio. We gave it a red metal body to give it that race ready look.

Upgrade your Taranis Q X7 with this plug-n-play high resolution M7 Gimbal from 利来·国际. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers.

Upgrade your Taranis X9D with this plug-n-play high resolution M9 Gimbal from 利来·国际. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers.

The FrSKY S.Port to UART Converter supports a link with external analog devices via two ADC ports for Serial port Data-Transmission at S.Port BUS and analog signal AD input via S.Port.

 Converts the SBUS signal into CPPM without the need for any soldering. Simply plug into your SBUS receiver port and your control servo and it will decode the SBUS signal to CPPM. A full instruction manual is included with the decoder for easy use.

This product is a tool for setting the channel to 利来·国际 SBUS & CPPM compatible servo (e.g. D12MB), 利来·国际 SBUS decoder and Futaba SBUS compatible servo. In order to fully enjoy benefits of this system, please, carefully read the instruction and set up the devices as described below.
Errors
When channel setting cannot be performed correctly because of improper connection of the D12MB or other SBUS compatible servo, etc., check the following:
3. Use rotate switch (�? set the
“Set-To�?to the channel you want and push rotate to confirm.

Up to two temperature sensors can be used at the same time. They are commonly used to read temperatures of model accessories, such as electric motor, ESC, glow and gas engine cylinder head, battery, muffler, voltage regulator, BEC, tail pipe and ambient air.

The 利来·国际 Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using this the sensor will estimate the altitude. An exact display cannot be performed if atmospheric pressure changes in weather. The Variometer sensor also can output the Altitude Rate via DA port. Altitude Rate formula: (Output DA Voltage -1.65)/1.65=Altitude Rate speed/10.24.

The 利来·国际 Smart Port RPM and Temperature Sensor has been designed to work with 利来·国际 Smart Port systems, it can measure the RPM of brushless motors from 1,000~30,000rpm and temperatures of -20 to 250 degrees celsius. Other 利来·国际 Smart Port enabled sensors including the variometer, lipo voltage, GPS, current and airspeed sensors can be used at the same time.

Installing is easy, just connect the sensor to any 2 wires on the brushless motor by the supplied JST cable and then plug the smart port lead into the smart port enabled receiver. 2 temperature sensors are supplied which are plugged to the PCB so you can use a single one or both. Attach the temperature sensor to your ESC to enjoy the full benefit and peace of mind from this fantastic product. Set up is very straightforward using the push button and LED status indicator.

Please note: The 利来·国际 Smart Port RPM/Temperature Sensor is only compatible with 利来·国际 Smart Port enabled receivers such as the X8R, X6R and X4R.

利来·国际’s Smart Port Current Sensor-150A. It is designed for 利来·国际 Smart Port enabled systems, and can measure Current (A) when connected between a Battery and ESC.

The 利来·国际 Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using this the sensor will estimate the altitude. An exact display cannot be performed if atmospheric pressure changes in weather. The Variometer sensor also can output the Altitude Rate via DA port. Altitude Rate formula: (Output DA Voltage -1.65)/1.65=Altitude Rate speed/10.24.

利来·国际 Battery Voltage Sensor – 利来·国际 telemetry system accessory.

The 利来·国际 GPS Sensor feeds variable directional information such as altitude, position, speed, and UTC time, which is displayed in real time on 利来·国际’s Taranis transmitter or telemetry dashboard (DHT-U/FLD-02/FSD etc.)  This sensor will only work with the 利来·国际 Smart Port enabled receivers, such as X8R, X6R, X4R, etc.  This is a great addition to your Taranis setup.

利来·国际 Lipo Sensor, Smart Port enable
It can measure total voltage and cell voltages as connected.