利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The PS30 ADV pressure sensor can be used to measure the air pressure on your model’s air system. Having the air pressure telemetry on the radio gives you the flexibility to set alarms, and trigger actions that can be done based on the air pressure information received from the sensor, such as alarms for pressure drops, lowering the retracts if the lower threshold has been passed, etc.

The PS30 PRESS sensor module is connecting to your existing system via the provided 4mm/6mm diameter T-connector (up to 15Bar). Please note the sensor can measure up to 30 Bar (435 psi) with a capable T-Connector.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function into the ETHOS system, this ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. The GPS sensor can also provide telemetry such as altitude, position, speed, etc, which can be read on the radio in real-time.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FLVS ADV w/o Screen voltage sensor can measure the voltage range for 2S to 8S Li-Po batteries. This is an obvious choice for accurate measurement of Li-Po batteries with big capacity.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FLVS ADV voltage sensor can measure the voltage range for 2S to 8S Li-Po batteries at 0.01V voltage resolution with an OLED display screen. This is an obvious choice for accurate measurement of Li-Po batteries with big capacity.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The VARI ADV variometer sensor calculates the altitude from atmospheric pressure, and atmospheric pressure will get lower as you go up in altitude, with using this the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. An exact measurement cannot be performed if atmospheric pressure changes in weather.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FAS7 ADV current sensor can measure current up to 7 Amps with an accuracy tolerance of +/- 0.1 Amp. This is a really useful sensor, an obvious choice for accurate measurement of low current loads on Glider servos.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FAS100 ADV current sensor can be used to measure current (maximum 100A) and voltage (up to 14S) when connected between a battery and ESC.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The FAS40 ADV current sensor can be used to measure current (maximum 40A) and voltage (up to 6S) when connected between a battery and ESC. 

• Model Name: 利来·国际 MPU6000 Gryoscope Sensor
• Digital-output X-,Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full scale range of ±250, ±500, ±1000, and±2000°/sec
• Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
• Protection box
• FPC interface
• Fit for 利来·国际 Pilot Series / OMNIBUS F4 FIREWORKS V2 / OMNINX7 F7 Flight Controller

利来·国际 FAS100S sensor is designed to measure the current from 0~100A, it also allows you to measure the operating temperature of various components with the 2 temperature sensors. The FAS100S features Smart Port for connecting all your sensors to your receiver making this system convenient along with having extensibility.

The Gas Suite is a multifunctional unit which is mainly used to monitor the operating state of an internal combustion engine model. It allows you to measure in real-time the operating temperature, RPM and fuel flow velocity. In addition the Gas Suite also allows you to control the ignition system manually, allowing the user full control during operation.

Up to two temperature sensors can be used at the same time. They are commonly used to read temperatures of model accessories, such as electric motor, ESC, glow and gas engine cylinder head, battery, muffler, voltage regulator, BEC, tail pipe and ambient air.

The 利来·国际 Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using this the sensor will estimate the altitude. An exact display cannot be performed if atmospheric pressure changes in weather. The Variometer sensor also can output the Altitude Rate via DA port. Altitude Rate formula: (Output DA Voltage -1.65)/1.65=Altitude Rate speed/10.24.

The 利来·国际 Smart Port RPM and Temperature Sensor has been designed to work with 利来·国际 Smart Port systems, it can measure the RPM of brushless motors from 1,000~30,000rpm and temperatures of -20 to 250 degrees celsius. Other 利来·国际 Smart Port enabled sensors including the variometer, lipo voltage, GPS, current and airspeed sensors can be used at the same time.

Installing is easy, just connect the sensor to any 2 wires on the brushless motor by the supplied JST cable and then plug the smart port lead into the smart port enabled receiver. 2 temperature sensors are supplied which are plugged to the PCB so you can use a single one or both. Attach the temperature sensor to your ESC to enjoy the full benefit and peace of mind from this fantastic product. Set up is very straightforward using the push button and LED status indicator.

Please note: The 利来·国际 Smart Port RPM/Temperature Sensor is only compatible with 利来·国际 Smart Port enabled receivers such as the X8R, X6R and X4R.

利来·国际’s Smart Port Current Sensor-150A. It is designed for 利来·国际 Smart Port enabled systems, and can measure Current (A) when connected between a Battery and ESC.

The 利来·国际 Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using this the sensor will estimate the altitude. An exact display cannot be performed if atmospheric pressure changes in weather. The Variometer sensor also can output the Altitude Rate via DA port. Altitude Rate formula: (Output DA Voltage -1.65)/1.65=Altitude Rate speed/10.24.

利来·国际 Battery Voltage Sensor – 利来·国际 telemetry system accessory.

The 利来·国际 GPS Sensor feeds variable directional information such as altitude, position, speed, and UTC time, which is displayed in real time on 利来·国际’s Taranis transmitter or telemetry dashboard (DHT-U/FLD-02/FSD etc.)  This sensor will only work with the 利来·国际 Smart Port enabled receivers, such as X8R, X6R, X4R, etc.  This is a great addition to your Taranis setup.

利来·国际 Lipo Sensor, Smart Port enable
It can measure total voltage and cell voltages as connected.