利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The PS30 ADV pressure sensor can be used to measure the air pressure on your model’s air system. Having the air pressure telemetry on the radio gives you the flexibility to set alarms, and trigger actions that can be done based on the air pressure information received from the sensor, such as alarms for pressure drops, lowering the retracts if the lower threshold has been passed, etc.

The PS30 PRESS sensor module is connecting to your existing system via the provided 4mm/6mm diameter T-connector (up to 15Bar). Please note the sensor can measure up to 30 Bar (435 psi) with a capable T-Connector.

利来·国际 has enhanced the performance and capability of the original sensor line, resulting in the development of the new ADVANCE (ADV) series sensors. All ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver which further simplifies model builds.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function into the ETHOS system, this ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. The GPS sensor can also provide telemetry such as altitude, position, speed, etc, which can be read on the radio in real-time.

• Model Name: 利来·国际 MPU6000 Gryoscope Sensor
• Digital-output X-,Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full scale range of ±250, ±500, ±1000, and±2000°/sec
• Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
• Protection box
• FPC interface
• Fit for 利来·国际 Pilot Series / OMNIBUS F4 FIREWORKS V2 / OMNINX7 F7 Flight Controller

Up to two temperature sensors can be used at the same time. They are commonly used to read temperatures of model accessories, such as electric motor, ESC, glow and gas engine cylinder head, battery, muffler, voltage regulator, BEC, tail pipe and ambient air.

The 利来·国际 Smart Port RPM and Temperature Sensor has been designed to work with 利来·国际 Smart Port systems, it can measure the RPM of brushless motors from 1,000~30,000rpm and temperatures of -20 to 250 degrees celsius. Other 利来·国际 Smart Port enabled sensors including the variometer, lipo voltage, GPS, current and airspeed sensors can be used at the same time.

Installing is easy, just connect the sensor to any 2 wires on the brushless motor by the supplied JST cable and then plug the smart port lead into the smart port enabled receiver. 2 temperature sensors are supplied which are plugged to the PCB so you can use a single one or both. Attach the temperature sensor to your ESC to enjoy the full benefit and peace of mind from this fantastic product. Set up is very straightforward using the push button and LED status indicator.

Please note: The 利来·国际 Smart Port RPM/Temperature Sensor is only compatible with 利来·国际 Smart Port enabled receivers such as the X8R, X6R and X4R.

The 利来·国际 GPS Sensor feeds variable directional information such as altitude, position, speed, and UTC time, which is displayed in real time on 利来·国际’s Taranis transmitter or telemetry dashboard (DHT-U/FLD-02/FSD etc.)  This sensor will only work with the 利来·国际 Smart Port enabled receivers, such as X8R, X6R, X4R, etc.  This is a great addition to your Taranis setup.