MANUAL
CERTIFICATE
ACCESS FIRMWARE
ACCST D16 FIRMWARE
MANUAL
CERTIFICATE
| UpdateTime | Version | File Size | Download |
|---|---|---|---|
| 2017-06-12 | 170612 | 265KB | DOWNLOAD |
ACCESS FIRMWARE
* The suggested ACCESS RSSI is 32 for Critical Alarm and 35 for Low Alarm.
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2023-07-21 | v2.1.8 | 1. Fixed the issue of no PWM output caused by abnormal conditions in the S.Port link such as unregular data sent by unknown devices in connection or exceeding the limitation of devices connected in the S.Port link (>27 units).
Note: Please make sure the involved Receiver [Archer series (except for RS), R-XSR, RXSR-FC, RX4R, RX6R, G-RX6, G-RX8] or Transmitter [ISRM-N, ISRM-Pro, ISRM-S series RF module] in using have been both upgraded with this update or later version. |
147KB | DOWNLOAD |
| 2021-04-19 | v2.1.7 | 1. Resolved the issue of that RXSR not starting properly when working with RXSR(RXSR as slave receiver) in redundancy mode . 2. Improved RF performance when working with the TANDEM module . |
143KB | DOWNLOAD |
| 2020-04-21 | v2.1.0 | 1.Improved reliability and stability of signal connection 2.Increased the range of control 3.Improved the stability of telemetry feedback 4.Added FLR ( Frame Lost Rate) output. 5.Added configurable function for telemetry power. 6.Added the option for switching S.Port / F.Port protocol. 7.Hold button for about 5 seconds to get the RSSI output from CH16 SBUS . Please update the firmware of all your radios(latest openTx or FrOS), RF modules and receivers accordingly. |
139KB | DOWNLOAD |
| 2019-11-08 | V1.1.4 | 1.Fix the issue that wrong RSSI values output. 2.F.Port firmware included. |
231KB | DOWNLOAD |
| 2019-08-12 | v1.1.3 | 1. Further reduce the system latency. 2. Decrease PWM signal period to 7ms. Note:Please update firmware of ISRM and radio to the latest versions accordingly. Please take care of that your servos are compatible to 7ms PWM signal. |
1010KB | DOWNLOAD |
| 2019-05-09 | V1.1.1 | First release. F.Port and S.Port are included. |
270KB | DOWNLOAD |
ACCST D16 FIRMWARE
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2021-01-06 | ACCST D16 v2.1.1(F.Port firmware update only ) | 1.Fix the issue that no output under failsafe mode(F.port firmware only). | 495kB | DOWNLOAD |
| 2020-03-24 | ACCST D16 v2.1.0 | 1.Fixed the channel output error (uncontrolled servo movements) under certain conditions. 2.Strengthened correction and verification capability. Note: Please update the firmware of all your radios, RF modules and receivers accordingly. |
492kB | DOWNLOAD |
History firmware DOWNLOAD (not compatible with v2.x.x)
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2020-01-16 | ACCST
D16 v2.0.1 |
1.Fixed the channel output error (uncontrolled servo movements) under certain conditions. 2.Strengthened correction and verification capability. Note: Please update the firmware of all your radios, RF modules and receivers accordingly. |
502kB | DOWNLOAD |
| 2019-11-29 | v191112 v191128 (F.Port) |
1.Fixed the problem of abnormal high frame loss rate. 2. F.Port version included. |
500KB | DOWNLOAD |
| 2019-03-13 | 190311 | 1. Fix the bug that sometimes can not bind to radios. 2. F.Port version included. |
503KB | DOWNLOAD |
