MANUAL
FIRMWARE
LUA SCRIPT - ETHOS
TOOLS
MANUAL
FIRMWARE
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2025-07-28 | 3.0.6 |
1. Added the option to enable/disable switching ability between different Gyro banks.
(Note: This feature requires a compatible Lua script v2.1.6 to function properly.) |
3.86MB | |
| 2025-06-19 | 3.0.5 |
1. Added Heading Hold mode. (RB35S)
2. Added support for configuring up to 15 banks of Gyro parameter memories. (RB35S) 3. Introduced Gyro parameter Copy & Preset features. (RB35S) 4. Enhanced flexibility in Gyro Mode settings (Enabling user-assignment of control channel and switch). (RB35S) 5. Enabled user-assignment ability of Gain Adjustment channel. (RB35S) 6. Added low-voltage read/write protection (Note: To ensure the device operates properly, the device must be powered by BAT1 and/or BAT2, with at least one maintaining a voltage above 6.0V. Otherwise, any modifications made by LUA scripts will NOT be saved to storage.) 7. Fixed known issues (including FBUS functionality, etc.) (RB35/RB35S) Note:
1. Keep the aircraft level on the ground for approximately 5 seconds after powering on the system.
2. All calibrations (including 6-Side, Level, Stick Center, and Stick Range) should be redone after the firmware update, and the Stab settings must be reconfigured. The center calibrations must also be repeated after trimming the center point. Click and Read → Manual |
2.64MB | |
| 2024-07-31 | v20240511 |
Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible. 1. Added the Reset function to recover the Stab settings to the factory settings. |
662KB | DOWNLOAD |
| 2023-09-14 | v20230509 | 1. Fixed the issue of loss of partial sensor data with multiple receivers in connection. 2. Fixed the issue that the pitch angle sometimes fails in Hover mode. 3. Added the support of compatibility with some 3rd party sensors. |
209KB | DOWNLOAD |
LUA SCRIPT - ETHOS
| UpdateTime | Version | Note | File Size | Download |
|---|---|---|---|---|
| 2024-07-31 | v3.0.0 | 1. Added new feature settings for working compatibly with the receiver flashed with the latest firmware version. – RB25S & RB35S (v202400511 or later versions) |
211KB | DOWNLOAD |
| 2024-06-04 | v1.1 | 1.Fixed the issue of Lua scripts failing to work caused by upgrading the ETHOS versions. | 209KB | DOWNLOAD |
| 2023-04-26 | v1.0 | 1.First release. | 210KB | DOWNLOAD |
TOOLS
| Tool | UpdateTime | Version | Note | File Size | Download |
|---|---|---|---|---|---|
| RBMixer (for RB35S) |
2023-10-11 | v1.0 | 1.The first release for ADV Stabilization feature. | 9.06 MB | DOWNLOAD |
