MANUAL
RF FIRMWARE - TD-ISRM
ETHOS Suite
MANUAL
RF FIRMWARE - TD-ISRM
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2024-08-16 | TD 2.2.7 | 1. Fixed the issue of the RF power (in self-adaptive mode) being maintained at the last output power after losing the telemetry data of the receiver. 2. Fixed the issue of the repeat telemetry data of the same sensor source. |
228KB | DOWNLOAD |
| 2023-11-17 | TD 2.2.6 | 1. Fixed the issue that the model with 2.4G ACCST mode failed to work after switching from the model set with other protocols. 2. Fixed the issue of RSSI alarms while staying in the Info menu. 3. Improved the switching speed of telemetry between RX1/RX2/RX3 in TD mode. 4. Added the support of telemetry data transmission through 2.4G links in the TD mode (The telemetry via 2.4G links can be also achieved under sufficient range with the RF power settings above 25mW in EU mode). Note: Please ensure the firmware of TD receivers is updated to the latest version. |
228KB | DOWNLOAD |
| 2022-11-30 | TD 2.2.4 | 1. Added the support for Tandem XE. | 225KB | DOWNLOAD |
| 2022-08-06 | TD 2.2.2 | 1. Fix the issue that FC cannot be set to 125/126 through the LUA script. 2. Fix the issue that offset values -2/-3 for SRX/SXR cannot be saved. 3. Fix the issue that telemetry cannot display sometimes after the RF mode is switched over. |
225KB | DOWNLOAD |
| 2022-03-30 | TD 2.2.1 | 1. Fix telemetry being sometimes unstable in TD mode. 2. Fix the abnormal 900M power output after switching between ACCST/ACCESS/TD modes. |
223KB | DOWNLOAD |
| 2022-01-29 | TD 2.2.0 | 1. Add support for the TDR18 receiver. 2. Fix SWR issue with v2.1.15. 3. Improve the stability of the telemetry system. Note: Please upgrade the Tandem receivers to 1.0.7 or above accordingly. |
225KB | DOWNLOAD |
| 2022-01-07 | TD 2.1.15 | Fixed an issue that could cause abnormal status due to frequent switching of rf modes. | 223KB | DOWNLOAD |
| 2021-09-29 | TD 2.1.14 | 1. Fixed RSSI value was limited to 35. 2. Power self-adaptation in 1W mode. |
223KB | DOWNLOAD |
| 2021-07-28 | TD 2.1.9 | 1. Fixed Ranger9 series failed on working after OTA updates. 2. Fixed the issue that under FLEX-868 mode,2.4G RF doesn’t work in LBT mode properly. |
219KB | DOWNLOAD |
| 2021-05-29 | TD 2.1.8 | 1. Fixed the failsafe issue. 2. For FLEX-868 firmware,2.4G RF will work in LBT mode. |
219KB | DOWNLOAD |
| 2021-05-17 | TD 2.1.7 | 1. Fixed telemetry frame loss when working with some Ranger9 series receivers. 2. Corrected display of SWR data source (Rx0 ->TX). |
217KB | DOWNLOAD |
ETHOS Suite
| Please check the latest ETHOS version & FW update info via the ETHOS Suite tool, more related resources can be also found here. |
